S. J. Zinkle and G. S. Was, Materials challenges in nuclear energy, Acta Mater, vol.61, pp.735-758, 2013.

S. J. Zinkle, K. A. Terrani, J. C. Gehin, L. J. Ott, and L. L. Snead, Accident tolerant fuels for LWRs: A perspective, J. Nucl. Mater, vol.448, pp.374-379, 2014.

R. R. Naslain, The design of the fibre-matrix interfacial zone in ceramic matrix composites, Compos. Part A Appl. Sci. Manuf, vol.29, pp.1145-1155, 1998.

Y. Katoh, K. Ozawa, C. Shih, T. Nozawa, R. J. Shinavski et al., Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects, J. Nucl. Mater, vol.448, pp.448-476, 2014.

R. Naslain, Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: An overview, Compos. Sci. Technol, vol.64, pp.155-170, 2004.

D. Goyal, X. Tang, J. D. Whitcomb, and A. D. Kelkar, Effect of various parameters on effective engineering properties of 2 × 2 braided composites, Adv. Mater. Struct, vol.12, pp.113-128, 2005.

E. V. Morozov, The effect of filament-winding mosaic patterns on the strength of thinwalled composite shells, Compos. Struct, vol.76, pp.123-129, 2006.

F. Bernachy-barbe, Caractérisation des mécanismes d ' endommagement et modélisation du comportement mécanique sous chargements multi-axiaux de tubes composites SiC / SiC, 2014.

J. Lamon, F. Rebillat, and A. G. Evans, Microcomposite Test Procedure for Evaluating the Interface Properties of Ceramic Matrix Composites, J Am. Ceram. Sac, vol.78, pp.401-405, 1995.

E. Buet, C. Sauder, D. Sornin, S. Poissonnet, J. N. Rouzaud et al., Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres, J. Eur. Ceram. Soc, vol.34, pp.179-188, 2014.

C. Chateau, L. Gélébart, M. Bornert, J. Crépin, E. Boller et al., In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites, Compos. Sci. Technol, vol.71, pp.916-924, 2011.

H. A. Bale, A. Haboub, A. A. Macdowell, J. R. Nasiatka, D. Y. Parkinson et al., Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600°C, Nat. Mater, vol.12, pp.40-46, 2013.

G. N. Morscher, Stress-dependent matrix cracking in 2D woven SiC-fiber reinforced melt-infiltrated SiC matrix composites, Compos. Sci. Technol, vol.64, pp.1311-1319, 2004.

M. Moevus, D. Rouby, N. Godin, M. R'mili, P. Reynaud et al., Analysis of damage mechanisms and associated acoustic emission in two SiC/[Si-B-C] composites exhibiting different tensile behaviours. Part I: Damage patterns and acoustic emission activity, Compos. Sci. Technol, vol.68, pp.1250-1257, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00434004

L. Gélébart, C. Chateau, M. Bornert, J. Crépin, and E. Boller, X-ray tomographic characterization of the macroscopic porosity of chemical vapor infiltration SiC/SiC composites: Effects on the elastic behavior, Int. J. Appl. Ceram. Technol, vol.7, pp.348-360, 2010.

F. Bernachy-barbe, L. Gélébart, M. Bornert, J. Crépin, and C. Sauder, Anisotropic damage behavior of SiC/SiC composite tubes: Multiaxial testing and damage characterization, Compos. Part A Appl. Sci. Manuf, vol.76, pp.281-288, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01183363

F. Bernachy-barbe, L. Gélébart, M. Bornert, J. Crépin, and C. Sauder, Characterization of SiC/SiC composites damage mechanisms using Digital Image Correlation at the tow scale, Compos. Part A Appl. Sci. Manuf, vol.68, pp.101-109, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01097822

L. Saucedo-mora, T. Lowe, S. Zhao, P. D. Lee, P. M. Mummery et al., In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite, J. Nucl. Mater, vol.481, pp.13-23, 2016.

C. Simon, F. Rebillat, V. Herb, and G. Camus, Monitoring damage evolution of SiCf/[SiBC]m composites using electrical resistivity: Crack density-based electromechanical modeling, Acta Mater, vol.124, pp.579-587, 2017.

B. P. Croom, P. Xu, E. J. Lahoda, C. P. Deck, and X. Li, Quantifying the three-dimensional damage and stress redistribution mechanisms of braided SiC/SiC composites by in situ volumetric digital image correlation, Scr. Mater, vol.130, pp.238-241, 2017.

V. Mazars, O. Caty, G. Couégnat, A. Bouterf, S. Roux et al., Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests, Acta Mater, vol.140, pp.130-139, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01593228

E. Maire and P. J. Withers, Quantitative X-ray tomography, Int. Mater. Rev, vol.59, pp.1-43, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01538208

E. Maillet, A. Singhal, A. Hilmas, Y. Gao, Y. Zhou et al., Combining insitu synchrotron X-ray microtomography and acoustic emission to characterize damage evolution in ceramic matrix composites, J. Eur. Ceram. Soc, vol.39, pp.3546-3556, 2019.

C. Chateau, T. T. Nguyen, M. Bornert, and J. Yvonnet, DVC-based image subtraction to detect microcracking in lightweight concrete, Strain. e12276, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01780698

Y. Chen, L. Gélébart, C. Chateau, M. Bornert, C. Sauder et al., Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography, Int. J. Solids Struct, vol.161, pp.111-126, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02010120

, AMITEX_FFTP

Y. Chen, L. Gélébart, C. Chateau, M. Bornert, A. King et al., 3D detection and quantitative characterization of cracks in a ceramic matrix composite tube using X-ray computed tomography, Exp. Mech, vol.60, pp.409-424, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02557516

Y. Chen, Damage mechanisms in SiC/SiC composite tubes : three-dimensional analysis coupling tomography imaging and numerical simulation, 2017.
URL : https://hal.archives-ouvertes.fr/tel-01730585

A. Mirone, E. Brun, E. Gouillart, P. Tafforeau, and J. Kieffer, The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities, Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. with Mater. Atoms, vol.324, pp.41-48, 2014.

M. Bornert, J. M. Chaix, P. Doumalin, J. C. Dupré, T. Fournel et al., Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'analyse des matériaux et des structures, Instrumentation, Mes. Métrologie, vol.4, pp.43-88, 2004.

Y. Chen, D. Vasiukov, L. Gélébart, and C. H. Park, A FFT solver for variational phase-field modeling of brittle fracture, Comput. Methods Appl. Mech. Eng, vol.349, pp.167-190, 2019.

S. C. Garcea, I. Sinclair, S. M. Spearing, and P. J. Withers, Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography, Compos. Sci. Technol, vol.149, pp.81-89, 2017.

C. Chateau, L. Gélébart, M. Bornert, J. Crépin, D. Caldemaison et al., Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites, J. Mech. Phys. Solids, vol.63, pp.298-319, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00903466

A. M. Hilmas, G. Henson, A. Singhal, Y. Gao, and M. Schuster, In-situ observation of damage in unidirectional CMC laminates under tension, Ceram. Int, 2020.