E. Anderheggen and H. Knöpfel, Finite element limit analysis using linear programming, International Journal of Solids and Structures, vol.8, pp.1413-1431, 1972.

A. Ben-tal and A. Nemirovski, Lectures on modern convex optimization: analysis, algorithms, and engineering applications, vol.2, 2001.

C. Bisbos and P. Pardalos, Second-order cone and semidefinite representations of material failure criteria, Journal of Optimization Theory and Applications, vol.134, pp.275-301, 2007.

J. Bleyer, Advances in the simulation of viscoplastic fluid flows using interior-point methods, Computer Methods in Applied Mechanics and Engineering, vol.330, pp.368-394, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01672045

J. Bleyer, Automating the formulation and resolution of convex variational problems: applications from image processing to computational mechanics, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02388646

J. Bleyer, 2020. fenics-optim -Convex optimization interface in FEniCS

J. Bleyer and P. De-buhan, A computational homogenization approach for the yield design of periodic thin plates. Part I: Construction of the macroscopic strength criterion, International Journal of Solids and Structures, vol.51, pp.2448-2459, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00987435

J. Bleyer and P. De-buhan, Lower bound static approach for the yield design of thick plates, International Journal for Numerical Methods in Engineering, vol.100, pp.814-833, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01082202

J. Bleyer and P. De-buhan, A numerical approach to the yield strength of shell structures, European Journal of Mechanics-A/Solids, vol.59, pp.178-194, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01303348

J. Bleyer, C. V. Le, and P. De-buhan, Locking-free discontinuous finite elements for the upper bound yield design of thick plates, International Journal for Numerical Methods in Engineering, vol.103, pp.894-913, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01184188

J. Bleyer, M. Maillard, P. De-buhan, and P. Coussot, Efficient numerical computations of yield stress fluid flows using second-order cone programming, Computer Methods in Applied Mechanics and Engineering, vol.283, pp.599-614, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01081508

S. Boyd and L. Vandenberghe, Convex optimization, 2004.

P. De-buhan, A fundamental approach to the yield design of reinforced soil structures, 1986.

M. Capurso, Limit analysis of continuous media with piecewise linear yeld condition, Meccanica, vol.6, pp.53-58, 1971.

R. Casciaro and L. Cascini, A mixed formulation and mixed finite elements for limit analysis, International Journal for Numerical Methods in Engineering, vol.18, pp.211-243, 1982.

W. F. Chen, Plasticity in reinforced concrete, 2007.

W. F. Chen, Limit analysis and soil plasticity, 2013.

E. Christiansen and K. Andersen, Computation of collapse states with von Mises type yield condition, International Journal for Numerical Methods in Engineering, vol.46, pp.1185-1202, 1999.

G. B. Dantzig, A. Orden, and P. Wolfe, The generalized simplex method for minimizing a linear form under linear inequality restraints, Pacific Journal of Mathematics, vol.5, pp.183-195, 1955.

P. De-buhan, J. Freard, D. Garnier, and S. Maghous, Failure properties of fractured rock masses as anisotropic homogenized media, Journal of Engineering Mechanics, vol.128, pp.869-875, 2002.

M. Frémond and A. Friaa, Analyse limite. comparaison des méthodes statique et cinématique. Comptes Rendus de l'Academie des Sciences, vol.286, pp.107-110, 1978.

P. Germain, La méthode des puissances virtuelles en mécanique des milieux continus, premiere partie: théorie du second gradient, Journal de mécanique, vol.12, pp.235-274, 1973.

P. Germain, The method of virtual power in continuum mechanics, Microstructure. SIAM Journal on Applied Mathematics, vol.2, pp.556-575, 1973.

M. Gilbert, C. Casapulla, and H. Ahmed, Limit analysis of masonry block structures with nonassociative frictional joints using linear programming, Computers & structures, vol.84, pp.873-887, 2006.

M. A. Herfelt, P. N. Poulsen, and L. C. Hoang, Strength-based topology optimisation of plastic isotropic von mises materials, Structural and Multidisciplinary Optimization, vol.59, pp.893-906, 2019.

R. Hill, The mathematical theory of plasticity, 1950.

A. Ilyushin, , 1956.

K. Johansen, Yield-line theory. Cement and Concrete Association London, 1962.

Z. Kammoun and H. Smaoui, A direct approach for continuous topology optimization subject to admissible loading, Comptes Rendus Mécanique, vol.342, pp.520-531, 2014.

N. Karmarkar, A new polynomial-time algorithm for linear programming, Proceedings of the sixteenth annual ACM symposium on Theory of computing, ACM, pp.302-311, 1984.

K. Krabbenhoft and L. Damkilde, Lower bound limit analysis of slabs with nonlinear yield criteria, Computers & structures, vol.80, pp.2043-2057, 2002.

K. Krabbenhoft, M. Karim, A. Lyamin, and S. Sloan, Associated computational plasticity schemes for nonassociated frictional materials, International Journal for Numerical Methods in Engineering, vol.90, pp.1089-1117, 2012.

K. Krabbenhoft, A. Lyamin, J. Huang, and M. V. Da-silva, Granular contact dynamics using mathematical programming methods, Computers and Geotechnics, vol.43, pp.165-176, 2012.

K. Krabbenhøft, A. Lyamin, and S. Sloan, Formulation and solution of some plasticity problems as conic programs, International Journal of Solids and Structures, vol.44, pp.1533-1549, 2007.

K. Krabbenhoft, A. Lyamin, S. Sloan, and P. Wriggers, An interior-point algorithm for elastoplasticity, International Journal for Numerical Methods in Engineering, vol.69, pp.592-626, 2007.

K. Krabbenhoft, A. V. Lyamin, M. Hjiaj, and S. W. Sloan, A new discontinuous upper bound limit analysis formulation, International Journal for Numerical Methods in Engineering, vol.63, pp.1069-1088, 2005.

K. Krabbenhøft, A. V. Lyamin, and S. W. Sloan, Three-dimensional mohr-coulomb limit analysis using semidefinite programming, Communications in Numerical Methods in Engineering, vol.24, pp.1107-1119, 2008.

M. S. Lobo, L. Vandenberghe, S. Boyd, and H. Lebret, Applications of second-order cone programming, Linear algebra and its applications, vol.284, pp.193-228, 1998.

J. Lysmer, Limit analysis of plane problems in soil mechanics, Journal of Soil Mechanics & Foundations Div, vol.96, pp.1311-1334, 1970.

A. Makrodimopoulos, Remarks on some properties of conic yield restrictions in limit analysis, International Journal for Numerical Methods in Biomedical Engineering, vol.26, pp.1449-1461, 2010.

A. Makrodimopoulos and C. Martin, Upper bound limit analysis using simplex strain elements and second-order cone programming, International journal for numerical and analytical methods in geomechanics, vol.31, pp.835-865, 2007.

A. Makrodimopoulos and C. Martin, Upper bound limit analysis using discontinuous quadratic displacement fields, Communications in Numerical Methods in Engineering, vol.24, pp.911-927, 2008.

C. M. Martin and A. Makrodimopoulos, Finite-element limit analysis of Mohr-Coulomb materials in 3d using semidefinite programming, Journal of Engineering Mechanics, vol.134, pp.339-347, 2008.

,. Mosek-aps, The MOSEK optimization API for Python, 2018.

. Mosek-aps, MOSEK Modeling Cookbook, 2019.

J. C. Nagtegaal, D. M. Parks, and J. Rice, On numerically accurate finite element solutions in the fully plastic range, Computer methods in applied mechanics and engineering, vol.4, pp.153-177, 1974.

B. Nayroles, Essai de théorie fonctionnelle des structures rigides plastiques parfaites, Journal de Mécanique, vol.9, pp.491-506, 1970.

Y. Nesterov, A. Nemirovskii, and Y. Ye, Interior-point polynomial algorithms in convex programming, vol.13, 1994.

M. P. Nielsen and L. C. Hoang, Limit analysis and concrete plasticity, 2016.

J. Pastor and S. Turgeman, Mise en oeuvre numérique des méthodes de l'analyse limite pour les matériaux de von mises et de coulomb standards en déformation plane, Mechanics Research Communications, vol.3, pp.469-474, 1976.

F. Portioli, C. Casapulla, M. Gilbert, and L. Cascini, Limit analysis of 3d masonry block structures with non-associative frictional joints using cone programming, Computers & Structures, vol.143, pp.108-121, 2014.

M. Robinson, A comparison of yield surfaces for thin shells, International Journal of Mechanical Sciences, vol.13, pp.345-354, 1971.

J. Salençon, Calculà la rupture et analyse limite. Presses de l'Ecole Nationale des Ponts et Chaussées, 1983.

J. Salençon, Yield Design. London, Hoboken : ISTE Ltd, 2013.

M. Save, Atlas of limit loads of metal plates, shells and disks, North-Holland Series in Applied Mathematics & Mechanics, 1995.

M. A. Save, C. E. Massonnet, and G. De-saxce, Plastic limit analysis of plates, shells, and disks, 1997.

J. Schlaich, K. Schäfer, and M. Jennewein, Toward a consistent design of structural concrete, PCI journal, vol.32, pp.74-150, 1987.

S. W. Sloan, Lower bound limit analysis using finite elements and linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.12, pp.61-77, 1988.

S. W. Sloan and P. W. Kleeman, Upper bound limit analysis using discontinuous velocity fields, Computer Methods in Applied Mechanics and Engineering, vol.127, pp.293-314, 1995.

P. Suquet, Elements of homogenization for inelastic solid mechanics. Homogenization techniques for composite media 272, pp.193-278, 1985.

H. Vincent, M. Arquier, J. Bleyer, and P. De-buhan, Yield design-based numerical analysis of threedimensional reinforced concrete structures, International Journal for Numerical and Analytical Methods in Geomechanics, vol.42, pp.2177-2192, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01855342

X. Zhang, K. Krabbenhoft, and D. Sheng, Particle finite element analysis of the granular column collapse problem, Granular Matter, vol.16, pp.609-619, 2014.