L. L. Snead, T. Nozawa, M. Ferraris, Y. Katoh, R. Shinavski et al., Silicon carbide composites as fusion power reactor structural materials, J. Nucl. Mater, vol.417, pp.330-339, 2011.

K. Yueh and K. A. Terrani, Silicon carbide composite for light water reactor fuel assembly applications, J. Nucl. Mater, vol.448, pp.380-388, 2014.

J. Lamon, A micromechanics-based approach to the mechanical behavior of brittle-matrix composites, Compos. Sci. Technol, vol.61, pp.2259-2272, 2001.

F. Bernachy-barbe, L. Gélébart, M. Bornert, J. Crépin, and C. Sauder, Anisotropic damage behavior of SiC/SiC composite tubes: Multiaxial testing and damage characterization, Compos. Part A Appl. Sci. Manuf, vol.76, pp.281-288, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01183363

M. Moevus, N. Godin, M. R'mili, D. Rouby, P. Reynaud et al., Analysis of damage mechanisms and associated acoustic emission in two SiCf/[Si-B-C] composites exhibiting different tensile behaviours. Part II: Unsupervised acoustic emission data clustering, Compos. Sci. Technol, vol.68, pp.1258-1265, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00434006

C. Simon, F. Rebillat, V. Herb, and G. Camus, Monitoring damage evolution of SiCf/[SiBC]m composites using electrical resistivity: Crack density-based electromechanical modeling, Acta Mater, vol.124, pp.579-587, 2017.

G. N. Morscher and N. A. Gordon, Acoustic emission and electrical resistance in SiC-based laminate ceramic composites tested under tensile loading, J. Eur. Ceram. Soc, vol.37, pp.3861-3872, 2017.

E. Maillet, N. Godin, M. R'mili, P. Reynaud, G. Fantozzi et al., Real-time evaluation of energy attenuation: A novel approach to acoustic emission analysis for damage monitoring of ceramic matrix composites, J. Eur. Ceram. Soc, vol.34, pp.1673-1679, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01808055

A. Morales-rodriguez, P. Reynaud, G. Fantozzi, J. Adrien, and E. Maire, Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography, Scr. Mater, vol.60, pp.388-390, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00431386

L. Gélébart, C. Chateau, M. Bornert, J. Crépin, and E. Boller, X-ray tomographic characterization of the macroscopic porosity of chemical vapor infiltration SiC/SiC composites: Effects on the elastic behavior, Int. J. Appl. Ceram. Technol, vol.7, pp.348-360, 2010.

R. Bertrand, O. Caty, V. Mazars, S. Denneulin, P. Weisbecker et al., In-situ tensile tests under SEM and X-ray computed microtomography aimed at studying a self-healing matrix composite submitted to different thermomechanical cycles, J. Eur. Ceram. Soc, vol.37, pp.3471-3474, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02301760

C. Chateau, L. Gélébart, M. Bornert, J. Crépin, E. Boller et al., In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites, Compos. Sci. Technol, vol.71, pp.916-924, 2011.

H. A. Bale, A. Haboub, A. A. Macdowell, J. R. Nasiatka, D. Y. Parkinson et al., Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600°C, Nat. Mater, vol.12, pp.40-46, 2013.

W. Na, D. Kwon, and W. Yu, X-ray computed tomography observation of multiple fiber fracture in unidirectional CFRP under tensile loading, Compos. Struct, vol.188, pp.39-47, 2017.

B. K. Bay, T. S. Smith, D. P. Fyhrie, and M. Saad, Digital volume correlation: Threedimensional strain mapping using X-ray tomography, Exp. Mech, vol.39, pp.217-226, 1999.

L. Saucedo-mora, M. Mostafavi, D. Khoshkhou, C. Reinhard, R. Atwood et al., Observation and simulation of indentation damage in a SiC-SiCfibreceramic matrix composite, Finite Elem. Anal. Des, vol.110, pp.11-19, 2016.

M. Mostafavi, N. Baimpas, E. Tarleton, R. C. Atwood, S. A. Mcdonald et al., Three-dimensional crack observation, quantification and simulation in a quasi-brittle material, Acta Mater, vol.61, pp.6276-6289, 2013.

L. Saucedo-mora, T. Lowe, S. Zhao, P. D. Lee, P. M. Mummery et al., In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite, J. Nucl. Mater, vol.481, pp.13-23, 2016.

F. Bernachy-barbe, L. Gélébart, M. Bornert, J. Crépin, and C. Sauder, Characterization of SiC/SiC composites damage mechanisms using Digital Image Correlation at the tow scale, Compos. Part A Appl. Sci. Manuf, vol.68, pp.101-109, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01097822

C. Chateau, T. T. Nguyen, M. Bornert, and J. Yvonnet, DVC-based image subtraction to detect microcracking in lightweight concrete, Strain. e12276, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01780698

A. King, N. Guignot, P. Zerbino, E. Boulard, K. Desjardins et al., Tomography and imaging at the PSICHE beam line of the SOLEIL synchrotron, Rev. Sci. Instrum, vol.87, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02331137

A. Mirone, E. Brun, E. Gouillart, P. Tafforeau, and J. Kieffer, The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities, Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. with Mater. Atoms, vol.324, pp.41-48, 2014.

M. Bornert, J. M. Chaix, P. Doumalin, J. C. Dupré, T. Fournel et al., Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'analyse des matériaux et des structures, Instrumentation, Mes. Métrologie, vol.4, pp.43-88, 2004.

Y. Chen, Damage mechanisms in SiC/SiC composite tubes : three-dimensional analysis coupling tomography imaging and numerical simulation, 2017.
URL : https://hal.archives-ouvertes.fr/tel-01730585

T. T. Nguyen, J. Yvonnet, M. Bornert, and C. Chateau, Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: Direct comparison between in situ testing-microCT experiments and phase field simulations, J. Mech. Phys. Solids, vol.95, pp.320-350, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01331213

A. Lyckegaard, G. Johnson, and P. Tafforeau, Correction of ring artifacts in X-ray tomographic images, Int. J. Tomogr. Simul, vol.18, pp.1-9, 2011.

T. Nguyen, Modeling of complex microcracking in cement based materials by combining numerical simulations based on a phase-field method and experimental 3D imaging, 2015.
URL : https://hal.archives-ouvertes.fr/tel-01318880

A. F. Cinar, S. M. Barhli, D. Hollis, M. Flansbjer, R. A. Tomlinson et al., An autonomous surface discontinuity detection and quantification method by digital image correlation and phase congruency, Opt. Lasers Eng, vol.96, pp.94-106, 2017.

Y. Chen, L. Gelebart, C. Chateau, M. Bornert, A. King et al., Damage initiation and propagation in braided SiC/SiC composite tubes: effect of braiding angle