Z. Ba?ant and L. Cedolin, Stability of structures, ASME Appl. Mech. Rev, 1991.

K. Kalochairetis and C. Gantes, Numerical and analytical investigation of collapse loads of laced built-up columns, Computers and Structures, vol.89, pp.1166-1176, 2011.

K. Kalochairetis and C. Gantes, Elastic buckling load of multi-story frames consisting of timoshenko members, Journal of Constructional Steel Research, vol.71, pp.231-244, 2012.

Y. Frostig, Buckling of sandwich panels with a flexible core, high-order theory, International Journal of Solids and Structures, vol.35, issue.3, pp.183-204, 1998.

J. Moita, A. Araújo, V. Correia, C. Soares, and C. M. Soares, Buckling and geometrically nonlinear analysis of sandwich structures, International Journal of Mechanical Sciences, vol.92, pp.154-161, 2015.

R. Yeghnem, H. Z. Guerroudj, L. H. Amar, S. A. Mefta, S. Benyoucef et al., Numerical modeling of the aging effects of rc shear walls strengthened by cfrp plates: A comparison of results from different code type models, Computers and Concrete, vol.19, issue.5, pp.579-588, 2017.

A. Thiel, ULS and SLS design of CLT and its implementation in the CLTdesigner, Focus solid timber solutions-European conference on cross laminated timber, 2013.

O. Perret, A. Lebée, C. Douthe, and K. Sab, The bending-gradient theory for the linear buckling of thick plates: Application to cross laminated timber panels, International Journal of Solids and Structures, vol.87, pp.139-152, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01712204

E. , for Standardisation, Eurocode 5 -design of timber structures, 1993.

E. Karacabeyli, B. Douglas, and . Handbook, cross-laminated timber, FPInnovations, 2013.

C. and S. Enso, Document technique d'application 3/13-750 : Panneaux bois a usage structurel, European Technical Agreement, 2014.

W. Ayrton and J. Perry, On struts, The engineer, vol.62, p.464, 1886.

A. Thiel and H. Krenn, Buckling lods for cross-laminated timber elements under uniaxial in-plane compression, Proceedings of the 14th World Conference on Timber Engineering, 2016.

Y. Li and F. Lam, Reliability analysis and duration-of-load strength adjustment factor of the rolling shear strength of cross laminated timber, Journal of Wood Science, vol.62, issue.6, pp.492-502, 2016.

A. Schniewind and J. Barrett, Wood as a linear orthotropic viscoelastic material, Wood Science and Technology, vol.6, issue.1, pp.43-57, 1972.

R. Jöbstl and G. Schickhofer, Comparative examination of creep of GLT -and CLT -slabs inbending, in: International Council for Research and Innovation in builduing and construction, 2007.

F. Colling, Creep behavior of cross laminated timber in service class 2, 2014.

C. Pirvu and E. Karacabeyli, Time-dependent behaviour of CLT, World Conference on Timber Engineering, 2014.

O. Perret, A. Lebée, C. Douthe, and K. Sab, Experimental determination of the equivalent-layer shear stiffness of CLT through four-point bending of sandwich beams, Construction and Building Materials, vol.186, pp.1132-1143, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01978755

T. Ehrhart and R. Brandner, Rolling shear: Test configurations and properties of some european soft-and hardwood species, Engineering Structures, vol.172, pp.554-572, 2018.

R. Brandner, G. Flatscher, A. Ringhofer, G. Schickhofer, and A. Thiel, Cross laminated timber (CLT): overview and development, European Journal of Wood and Wood Products, vol.74, issue.3, pp.331-351, 2016.

G. Schickhofer, R. Brandner, and H. Bauer, Introduction to CLT, product properties, strength classes, COST Actions FP1402 & FP1404 KTH Building Materials, 10.3. 2016 Cross Laminated Timber-A competitive wood product for visionary and fire safe buildings, p.9, 2016.

O. Perret, C. Douthe, A. Lebée, and K. Sab, Equivalent stiffness of timber used in CLT -closed-form estimates and numerical validation, European Journal of Wood and Wood Products, vol.3, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02055968

L. Franzoni, A. Lebée, F. Lyon, and G. Forêt, Elastic behavior of cross laminated timber and timber panels with regular gaps: Thick-plate modeling and experimental validation, Engineering Structures, vol.141, pp.402-416, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01691125

L. Franzoni, A. Lebée, F. Lyon, and G. Forêt, Closed-form solutions for predicting the thick elastic plate behavior of CLT and timber panels with gaps, Engineering Structures, vol.164, pp.290-304, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01978742

P. Mayencourt and C. Mueller, Structural optimization of cross-laminated timber panels in one-way bending, Structures, 2018.

P. Becker and K. Rautenstrauch, Deformation and stability of columns of visco elastic material wood, Proceedings of the CIBW18 Meeting. Savonlinna, vol.31, 1998.

P. Becker and K. Rautenstrauch, Time-dependent material behavior applied to timber columns under combined loading. part ii: Creep-buckling, European Journal of Wood and Wood Products, vol.59, issue.6, pp.491-495, 2001.

P. Becker and K. Rautenstrauch, Time-dependent material behavior applied to timber columns under combined loading. part i: Creep deformation, European Journal of Wood and Wood Products, vol.59, issue.5, pp.380-386, 2001.

P. Gressel, Prediction of long-term deformation-behavior from short-term creep experiments, Holz Als Roh-und Werkstoff, vol.42, issue.8, pp.293-301, 1984.

N. Shiro, M. Atsushi, S. Tatsuya, A. Yasuhiro, Y. Nobuyoshi et al., Creep and duration of load characteristics of cross laminated timber, Proceedings of the 13th World Conference on Timber Engineering (WCTE 2014), 2014.

Y. Li and F. Lam, Low cycle fatigue tests and damage accumulation models on the rolling shear strength of crosslaminated timber, Journal of Wood Science, vol.62, issue.3, pp.251-262, 2016.