N. Kikuchi and J. Oden, Contact problems in elasticity : a study of variational inequalities and finite element methods, Society for Industrial and Applied Mathematics, 1988.

M. R. Hestenes, Multiplier and gradient methods, Journal of optimization theory and applications, vol.4, issue.5, pp.303-320, 1969.

M. J. Powell, A method for nonlinear constraints in minimization problems, 1969.

P. Wriggers and G. Zavarise, Application of augmented Lagrangian techniques for nonlinear constitutive laws in contact interfaces, Communications in Numerical Methods in Engineering, vol.9, issue.10, pp.815-824, 1993.

M. Fortin and R. Glowinski, Augmented Lagrangian methods: applications to the numerical solution of boundary-value problems, 2000.

J. C. Simo and T. Laursen, An augmented lagrangian treatment of contact problems involving friction, Computers & Structures, vol.42, issue.1, pp.97-116, 1992.

T. Laursen and J. Simo, Algorithmic symmetrization of coulomb frictional problems using augmented lagrangians, Computer methods in applied mechanics and engineering, vol.108, issue.1-2, pp.133-146, 1993.

P. Alart and A. Curnier, A mixed formulation for frictional contact problems prone to newton like solution methods, Computer methods in applied mechanics and engineering, vol.92, issue.3, pp.353-375, 1991.

P. Alart, Méthode de Newton généralisée en mécanique du contact, Journal de Mathématiques Pures et Appliquées, vol.76, issue.1, pp.89946-89947, 1997.

S. Hüeber and B. I. Wohlmuth, A primal-dual active set strategy for non-linear multibody contact problems, Computer Methods in Applied Mechanics and Engineering, vol.194, pp.3147-3166, 2005.

M. Hintermüller, K. Ito, and K. Kunisch, The primal-dual active set strategy as a semismooth Newton method, SIAM Journal on Optimization, vol.13, issue.3, pp.865-888, 2002.

A. Popp and W. Wall, Dual mortar methods for computational contact mechanicsoverview and recent developments, GAMM-Mitteilungen, vol.37, issue.1, pp.66-84, 2014.

Y. Kanno, Nonsmooth mechanics and convex optimization, 2011.

Y. Kanno, J. A. Martins, A. Pinto-da, and C. , Three-dimensional quasi-static frictional contact by using second-order cone linear complementarity problem, International Journal for Numerical Methods in Engineering, vol.65, issue.1, pp.62-83, 2006.

H. Zhang, J. Li, and S. Pan, New second-order cone linear complementarity formulation and semi-smooth newton algorithm for finite element analysis of 3d frictional contact problem, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.1-4, pp.77-88, 2011.

A. Klarbring, A mathematical programming approach to three-dimensional contact problems with friction, Computer Methods in Applied Mechanics and Engineering, vol.58, issue.2, pp.175-200, 1986.

D. E. Stewart and J. C. Trinkle, An implicit time-stepping scheme for rigid body dynamics with inelastic collisions and Coulomb friction, International Journal for Numerical Methods in Engineering, vol.39, issue.15, pp.2673-2691, 1996.

M. Hjiaj, Z. Feng, G. De, Z. Saxcé, and . Mróz, Three-dimensional finite element computations for frictional contact problems with non-associated sliding rule, International Journal for Numerical Methods in Engineering, vol.60, issue.12, pp.2045-2076, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00069709

P. Joli and Z. Feng, Uzawa and Newton algorithms to solve frictional contact problems within the bi-potential framework, International Journal for Numerical Methods in Engineering, vol.73, issue.3, pp.317-330, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00342939

M. S. Lobo, L. Vandenberghe, S. Boyd, and H. Lebret, Applications of second-order cone programming, Linear Algebra and its Applications, vol.284, issue.1-3, pp.193-228, 1998.

E. Andersen, C. Roos, and T. Terlaky, On implementing a primal-dual interior-point method for conic quadratic optimization, Mathematical Programming, vol.95, issue.2, pp.249-277, 2003.

S. P. Boyd and L. Vandenberghe, Convex optimization, 2004.

M. Wright, The interior-point revolution in optimization: history, recent developments, and lasting consequences, Bulletin of the American mathematical society, vol.42, issue.1, pp.39-56, 2005.

A. Makrodimopoulos and C. M. Martin, Lower bound limit analysis of cohesive-frictional materials using second-order cone programming, International Journal for Numerical Methods in Engineering, vol.66, issue.4, pp.604-634, 2006.

A. Makrodimopoulos and C. M. Martin, Upper bound limit analysis using simplex strain elements and second-order cone programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.31, issue.6, pp.835-865, 2007.

A. V. Lyamin and S. W. Sloan, Lower bound limit analysis using non-linear programming, International Journal for Numerical Methods in Engineering, vol.55, issue.5, pp.573-611, 2002.

A. V. Lyamin and S. W. Sloan, Upper bound limit analysis using linear finite elements and non-linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.26, issue.2, pp.181-216, 2002.

J. Bleyer, M. Maillard, P. De-buhan, and P. Coussot, Efficient numerical computations of yield stress fluid flows using second-order cone programming, Computer Methods in Applied Mechanics and Engineering, vol.283, pp.599-614, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01081508

J. Bleyer, Advances in the simulation of viscoplastic fluid flows using interior-point methods, Computer Methods in Applied Mechanics and Engineering, vol.330, pp.368-394, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01672045

K. Krabbenhoft, A. Lyamin, J. Huang, M. Vicente-da, and S. , Granular contact dynamics using mathematical programming methods, Computers and Geotechnics, vol.43, pp.165-176, 2012.

J. Kleinert, B. Simeon, and M. Obermayr, An inexact interior point method for the largescale simulation of granular material, Computer Methods in Applied Mechanics and Engineering, vol.278, pp.567-598, 2014.

P. W. Christensen, A. Klarbring, J. S. Pang, and N. Strömberg, Formulation and comparison of algorithms for frictional contact problems, International Journal for Numerical Methods in Engineering, vol.42, issue.1, pp.145-173, 1998.

G. Tanoh, Y. Renard, and D. Noll, Computational experience with an interior point algorithm for large scale contact probles, Optimization Online, vol.10, issue.2, p.18, 2004.

D. Mangoni, A. Tasora, and R. Garziera, A primal-dual predictor-corrector interior point method for non-smooth contact dynamics, Computer Methods in Applied Mechanics and Engineering, vol.330, pp.351-367, 2018.

I. Temizer, M. Abdalla, and Z. , An interior point method for isogeometric contact, Computer Methods in Applied Mechanics and Engineering, vol.276, pp.589-611, 2014.

M. Gilbert, C. Casapulla, and H. Ahmed, Limit analysis of masonry block structures with non-associative frictional joints using linear programming, Computers & structures, vol.84, pp.873-887, 2006.

K. Krabbenhoft, M. Karim, A. Lyamin, and S. Sloan, Associated computational plasticity schemes for nonassociated frictional materials, International Journal for Numerical Methods in Engineering, vol.90, issue.9, pp.1089-1117, 2012.

O. C. Zienkiewicz and R. L. Taylor, The finite element method, 5th Edition, 2000.

B. Fraeijs-de-veubeke, Diffusion des inconnues hyperstatiques dans les voilures à longerons couplés, vol.24, 1951.

J. De-almeida and J. Freitas, Alternative approach to the formulation of hybrid equilibrium finite elements, Computers & Structures, vol.40, issue.4, 1991.

J. P. De-almeida and O. J. Pereira, A set of hybrid equilibrium finite elements models for the analysis of three dimensional solids, International Journal for Numerical Methods in Engineering, vol.39, issue.16, pp.2789-2802, 1996.

J. P. De-almeida and E. A. Maunder, Equilibrium finite element formulations, 2017.

S. Mehrotra, On the implementation of a primal-dual interior point method, SIAM Journal on Optimization, vol.2, issue.4, pp.575-601, 1992.

Y. E. Nesterov and M. J. Todd, Primal-dual interior-point methods for self-scaled cones, SIAM Journal on optimization, vol.8, issue.2, pp.324-364, 1998.

M. Smith, ABAQUS/Standard User's Manual, Version 6.9, Simulia, 2009.

G. D. Saxcé and Z. Q. Feng, The bipotential method: a constructive approach to design the complete contact law with friction and improved numerical algorithms, Mathematical and Computer Modelling, vol.28, issue.4, pp.119-127, 1998.

T. H. Pian, Derivation of element stiffness matrices by assumed stress distributions, AIAA Journal, vol.2, issue.7, pp.1333-1336, 1964.

M. Kempeneers, J. Debongnie, and P. Beckers, Pure equilibrium tetrahedral finite elements for global error estimation by dual analysis, International Journal for Numerical Methods in Engineering, vol.81, issue.4, pp.513-536, 2009.

B. Fraeijs-de-veubeke, Displacement and equilibrium models in the finite element method, International Journal for Numerical Methods in Engineering, vol.52, issue.3, pp.287-342, 2001.

G. Morera, Soluzione generale delle equazioni indefinite dell'equilibrio di un corpo continuo, Atti Accad. Naz. Lincei, Rend. Cl. Fis. Mat. Natur., V. Ser, vol.1, issue.1, pp.137-141

J. C. Maxwell, On reciprocal diagrams in space, and their relation to Airy's function of stress, Proceedings of the London Mathematical Society, vol.1, issue.1, pp.58-63, 1866.

F. Alizadeh and D. Goldfarb, Second-order cone programming, Mathematical Programming, vol.95, issue.1, pp.3-51, 2003.

. Mosek, Mosek modeling manual, User manual, 2013.

J. Sturm, Using SeDuMi 1.02, a matlab toolbox ofr optimization over symmetric cones, Optimization Methods and Software

E. Andersen, On formulating quadratic functions in optimization problems, 2013.

P. Ladevèze and J. P. Pelle, Mastering calculations in linear and nonlinear mechanics, Mechanical engineering series, p.55094720, 2005.

F. Alauzet and P. Frey, Estimateur d'erreur géométrique et métriques anisotropes pour l'adaptation de maillage. Partie I : aspects théoriques, Institut national de recherche en informatique et en automatique, vol.37, pp.55-57, 2006.

R. Ku?era, J. Machalová, H. Netuka, and P. ?en?ák, An interior-point algorithm for the minimization arising from 3d contact problems with friction, Optimization methods and software, vol.28, issue.6, pp.1195-1217, 2013.

J. Debongnie, A general theory of dual error bounds by finite elements, 1983.

J. Debongnie, H. Zhong, and P. Beckers, Dual analysis with general boundary conditions, Computer Methods in Applied Mechanics and Engineering, vol.122, issue.1-2, pp.183-192, 1995.

P. Coorevits, P. Hild, and M. Hjiaj, A posteriori error control of finite element approximations for Coulomb's frictional contact, SIAM Journal on Scientific Computing, vol.23, issue.3, pp.976-999, 2001.

F. Louf, J. Combe, and J. Pelle, Constitutive error estimator for the control of contact problems involving friction, Computers & Structures, vol.81, pp.1759-1772, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01689633

F. B. Belgacem, C. Bernardi, A. Blouza, and M. Vohralik, On the unilateral contact between membranes. Part 2: a posteriori analysis and numerical experiments, IMA Journal of Numerical Analysis, vol.32, issue.3, pp.1147-1172, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00461144

P. Ladevèze and L. Chamoin, Verifying Calculations -Forty Years On: An Overview of Classical Verification Techniques for FEM Simulations, pp.59-94, 2016.

A. De-coninck, B. De, D. Baets, F. Kourounis, O. Verbosio et al., Needles: toward large-scale genomic prediction with marker-byenvironment interaction, Genetics, vol.203, issue.1, pp.543-555, 2016.

F. Verbosio, A. D. Coninck, D. Kourounis, and O. Schenk, Enhancing the scalability of selected inversion factorization algorithms in genomic prediction, Journal of Computational Science, vol.22, pp.99-108, 2017.

D. Kourounis, A. Fuchs, and O. Schenk, Towards the next generation of multiperiod optimal power flow solvers, IEEE Transactions on Power Systems PP (99), pp.1-10, 2018.