E. Kindle, Some Factors Affecting the Development of Mud-Cracks, Journal of Geology, vol.682, pp.135-144, 1917.
DOI : 10.1086/622446
URL : http://www.journals.uchicago.edu/doi/pdfplus/10.1086/622446

J. T. Lau, Thesis : Desiccation cracking of soils, vol.684, 1987.

A. N. Abu-hejleh and D. Znidarcic, Desiccation Theory for Soft Cohesive Soils, Journal of 685 Geotechnical Engineering, vol.121, issue.6, pp.493-502, 1995.
DOI : 10.1061/(asce)0733-9410(1995)121:6(493)

G. D. Towner, The Mechanics of Cracking of Drying, Journal of Agricultural Engineering 687 Research, vol.36, issue.2, pp.115-124, 1987.

R. Baker, Tensile strength, tension cracks, and stability of slopes, Soils and Foundations, vol.689, issue.2, pp.1-17, 1981.

N. Yesiller, C. J. Miller, G. Inci, and K. Yaldo, Desiccation and cracking behavior of three compacted 691 landfill liner soils, Engineering Geology, vol.57, pp.105-121, 2000.

G. H. Omidi, J. C. Thomas, and K. W. Brown, Effect of desiccation cracking on the hydraulic 693 conductivity of a compacted clay liner, Water, Air and Soil Pollution, vol.89, pp.91-103, 1996.

H. Nahlawi and J. K. Kodikara, Laboratory experiments on desiccation cracking of thin soil layers

, Geotechnical & Geological Engineering, vol.24, pp.1641-1664, 2006.

M. Sanchez, A. Atique, S. Kim, E. Romero, and M. Zielinski, Exploring desiccation cracks in soils 697 using a 2D profile laser device, Acta Geotechnica, vol.8, issue.6, pp.583-596, 2013.
DOI : 10.1007/s11440-013-0272-1

C. S. Tang, B. Shi, C. Liu, W. B. Suo, and L. Gao, Experimental characterization of shrinkage and 699 desiccation cracking in thin clay layer, Applied Clay Science, vol.52, pp.69-77, 2011.

H. Peron, T. Hueckel, L. Laloui, and L. Hu, Fundamentals of desiccation cracking of fine-grained 701 soils : experimental characterisation and mechanisms identification, Canadian Geotechnical 702 Journal, vol.46, pp.1177-1201, 2009.

A. Corte and A. Higashi, Experimental Research on Desiccation Cracks in Soil. Army Snow Ice and 704 Permafrost Research Establishment, 1960.

J. H. Li and L. M. Zhang, Study of desiccation crack initiation and development at ground surface, 706 Engineering Geology, vol.123, issue.4, pp.347-358, 2011.

J. M. Konrad and R. Ayad, Desiccation of a sensitive clay: field experimental observations

, Lachenbruch A. Depth and spacing of tension cracks, Journal of Geophysical Research, vol.34, issue.6, pp.4273-4292, 1961.

P. H. Morris, J. Graham, and D. J. Williams, Cracking in drying soil, Canadian Geotechnical Journal, vol.712, issue.2, pp.263-277, 1992.

T. K. Karalis and K. T. Karalis, A model for regular desiccation cracks formation, Acta Mechanica, vol.714, issue.7, pp.1517-1536, 2012.
DOI : 10.1007/s00707-012-0672-6

R. Ayad, J. M. Konrad, and M. Soulié, Desiccation of a sensitive clay: application of the model 716 CRACK, Canadian Geotechnical Journal, vol.34, issue.6, pp.943-951, 1997.

J. M. Konrad and R. Ayad, An idealized framework for the analysis of cohesive soils undergoing 718 desiccation, Canadian Geotechnical Journal, vol.34, issue.4, pp.477-488, 1997.

J. K. Kodikara and X. Choi, A simplified analytical model for desiccation cracking of clay layers in 720 laboratory tests, Fourth International Conference on Unsaturated Soils, vol.721, pp.2558-2567, 2006.

A. L. Amarasiri, J. K. Kodikara, and S. Costa, Numerical modelling of desiccation cracking, International Journal for Numerical and Analytical Methods in Geomechanics, vol.722, issue.1, p.22, 2010.

H. Peron, J. Y. Delenne, . Laloui, and E. I. Youssoufi, Discrete element modelling of drying shrinkage 725 and cracking of soils, Computers and Geotechics, vol.36, pp.61-69, 2009.

M. Sánchez, O. L. Manzoli, and L. Guimarães, Modeling 3-D desiccation soil crack networks using 727 a mesh fragmentation technique, Computers and Geotechics, vol.62, p.24, 2014.

A. L. Amarasiri and J. Kodikara, Numerical Modeling of Desiccation Cracking Using the Cohesive 729 Crack Method, International Journal of Geomechanics, vol.13, issue.3, pp.213-221, 2013.

G. Deng and Z. J. Shen, Numerical simulation of crack formation process in clays during drying and 731 wetting, Geomechanics and Geoengineering, vol.1, issue.1, pp.27-41, 2006.

S. Hirobe and K. Oguni, Coupling analysis of pattern formation in desiccation cracks, Computer 733 Methods in Applied Mechanics and Engineering, vol.607, pp.470-488, 2016.

J. Sima, M. Jiang, and C. Zhou, Numerical simulation of desiccation cracking in a thin clay layer 735 using 3D discrete element modeling, Computers and Geotechics, vol.56, pp.168-180, 2014.

J. Kodikara and S. Costa, Desiccation Cracking in Clayey Soils: Mechanisms and Modelling

, Multiphysical Testing of Soils and Shales, pp.21-32, 2013.

B. N. Rao and S. Rahman, Mesh-free analysis of cracks in isotropic functionally graded materials, 739 Engineering Fracture Mechanics, vol.70, issue.1, pp.1-27, 2003.

T. Rabczuk and T. Belytschko, Cracking particles: a simplified meshfree method for arbitrary 741 evolving cracks, International Journal for Numerical Methods in Enginnering, vol.742, issue.13, pp.2316-2343, 2004.

D. Penev and M. Kawamura, Estimation of the spacing and the width of cracks caused by shrinkage 744 in the cement-treated slab under restraint, Cement and Concrete Research, vol.23, issue.4, p.32, 1993.

V. Y. Chertkov and I. Ravina, Modeling the crack network of swelling clay soils, Soil Science 746 Society of America Journal, vol.62, issue.5, pp.34-48, 1998.

H. Peron, L. Laloui, L. B. Hu, and T. Hueckel, Formation of drying crack patterns in soils: A 750 deterministic approach, Acta Geotechnica, vol.8, issue.2, pp.215-221, 2013.

D. Leguillon, Strength or toughness ? A criterion for crack onset at a notch, European Journal 752 of Mechanics-A/Solids, vol.21, issue.1, pp.61-72, 2002.

E. Martin, D. Leguillon, and N. Carrère, A coupled strength and toughness criterion for the prediction 754 of the open hole tensile strength of a composite plate, International Journal of Solids and 755 Structures, vol.49, issue.26, pp.3915-3922, 2012.

S. Costa, J. Kodikara, S. L. Barbour, and D. G. Fredlund, Theoretical analysis of desiccation crack 757 spacing of a thin , long soil layer, Acta Geotechnica, vol.13, issue.1, pp.39-49, 2018.

K. H. Roscoe, A. N. Schofield, and C. P. Wroth, Bishop A. The principle of effective stress, Géotechnique, vol.8, issue.1, p.40, 1958.

R. I. Borja, Nuth M, Laloui L. Effective stress concept in unsaturated soils : Clarification and validation of 764 a unified framework, International Journal for Numerical and Analytical Methods in 765 Geomechanics, vol.43, issue.6, pp.771-801, 2006.

G. Houlsby, The work input to an unsaturated granular material, Géotechinique, vol.767, issue.1, pp.193-196, 1997.

R. I. Borja, -. Cam, and . Plasticity, Part V : A mathematical framework for three-phase 769 deformation and strain localization analyses of partially saturated porous media, Methods in Applied Mechanics and Engineering, vol.770, pp.5301-5338, 2004.

L. Pense, S. Arson, C. Pouya, and A. , A fully coupled damage-plasticity model for unsaturated 772 geomaterials accounting for the ductile -brittle transition in drying clayey soils, International 773 Journal of Solids and Structures, vol.91, pp.102-114, 2016.

H. Shin and J. C. Santamarina, Desiccation cracks in saturated fine-grained soils : particle-level 775 phenomena and effective-stress analysis, Géotechnique, vol.61, issue.11, pp.961-972, 2011.

A. Pandolfi and M. Ortiz, An eigenerosion approach to brittle fracture, International Journal for 777 Numerical Methods in Enginnering, vol.92, issue.8, p.47, 2012.

M. R. Eslami, Finite Elements Methods in Mechanics. Solid Mechanics and Its Applications, vol.779, pp.209-222, 2014.

A. Pouya, A Finite Element code for flow and deformation in porous fractured materials and 781 structures, vol.782, p.49

A. Pouya, A finite element method for modeling coupled flow and deformation in porous 783 fractured media, International Journal for Numerical and Analytical Methods in Geomechanics, vol.784, issue.16, pp.1836-1852, 2015.

T. D. Vo, A. Pouya, S. Hemmati, and A. M. Tang, Numerical modelling of desiccation cracking of 786 clayey soil using a cohesive fracture method, Computers and Geotechics, vol.85, p.51, 2017.

T. D. Vo, A. Pouya, S. Hemmati, and A. M. Tang, Numerical modelling of desiccation cracking of 788 clayey soil, Unsaturated, pp.1-6, 2016.

R. W. Zimmerman and G. S. Bodvarsson, Hydraulic Conductivity of Rock Fractures, vol.790, p.53, 1994.

M. T. Van-genuchten, A Closed-form Equation for Predicting the Hydraulic Conductivity of 791

, Unsaturated Soils, Soil Science Society of America Journal, vol.44, issue.5, p.54, 1980.

L. A. Richards, Capillary Conduction of Liquids Through Porous Mediums, Physics, vol.793, issue.5, pp.318-333, 1931.

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of 795 Solids, vol.8, issue.2, pp.100-104, 1960.

G. I. Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture, Advances in 797 Applied Mechanics, vol.7, pp.55-129, 1962.

J. W. Hutchinson and A. G. Evans, Mechanics of materials: top-down approaches to fracture, Acta 799 Materialia, vol.48, issue.1, pp.125-135, 2000.

M. Elices, G. V. Guinea, J. Gomez, and J. Planas, The cohesive zone model : advantages , limitations 801 and challenges, Engineering Fracture Mechanics, vol.69, issue.2, pp.137-163, 2002.

C. R. Chen and Y. W. Mai, Comparison of cohesive zone model and linear elastic fracture mechanics 803 for a mode I crack near a compliant/stiff interface, Engineering Fracture Mechanics, vol.804, issue.17, pp.3408-3417, 2010.

T. Stankowski, K. Runesson, and S. Sture, Fracture and slip of interfaces in cementitious composites. 806 II: Implementation, Journal of Engineering Mechanics, vol.119, issue.2, pp.315-327, 1993.

H. Y. Yang and M. L. Wang, Constitutive theory of interface behaviour in quasi-brittle materials, Journal of Engineering Mechanics, vol.808, issue.12, pp.2588-2603, 1994.

I. Carol, P. C. Prat, and C. M. Lopez, Normal/Shear cracking model: Application to discrete crack 810 analysis, Journal of Engineering Mechanics, vol.123, issue.8, pp.765-773, 1997.
DOI : 10.1061/(asce)0733-9399(1997)123:8(765)

A. Pouya and P. Bemani, A damage-plasticity model for cohesive fractures, International Journal of 812 Rock Mechanics and Mining Sciences, vol.73, pp.194-202, 2015.
DOI : 10.1016/j.ijrmms.2014.09.024

T. Liu, P. Cao, and H. Lin, Damage and fracture evolution of hydraulic fracturing in compression-814 shear rock cracks, Theoretical and Applied Fracture Mechancis, vol.74, pp.55-63, 2014.

A. Pandolfi, S. Conti, and M. Ortiz, A recursive-faulting model of distributed damage in confined 816 brittle materials, Journal of the Mechanics and Physics of Solids, vol.54, issue.9, p.66, 2006.

C. Shet and N. Chandra, Analysis of energy balance when using cohesive zone models to simulate 818 fracture processes, Journal of Engineering Materials and Technology, vol.124, issue.4, p.67, 2002.
DOI : 10.1115/1.1494093

Y. L. Gui, W. Hu, Z. Y. Zhao, and X. Zhu, Numerical modelling of a field soil desiccation test using a 820 cohesive fracture model with Voronoi tessellations, Acta Geotechnica, vol.13, issue.1, p.68, 2018.

E. Sarris and P. Papanastasiou, Modelling of hydraulic fracturing in a poroelastic cohesive 822 formation, International Journal of Geomechanics, vol.12, issue.2, pp.160-167, 2011.

D. Bellis, M. L. , D. Vecchia, G. Ortiz, M. Pandolfi et al., A linearized porous brittle damage 824 material model with distributed frictional-cohesive faults, Engineering Geology, vol.215, pp.10-825, 2016.

D. Bellis, M. L. , D. Vecchia, G. Ortiz, M. Pandolfi et al., A multiscale model of distributed 827 frcature and permeability in solids in all-round compression, Journal of the Mechanics, vol.828, pp.12-31, 2017.

H. Van-eekelen, Isotropic yield surfaces in three dimensions for use in soil mechanics, International Journal for Numerical and Analytical Methods in Geomechanics, vol.830, issue.1, p.89, 1980.

A. Griffith, The Phenomena of Rupture and Flow in Solids. Philosophical Transactions of the 833, Royal Society of London, vol.221, pp.163-198, 1921.

A. L. Amarasiri, S. Costa, and J. K. Kodikara, Determination of cohesive properties for mode I fracture 835 from compacted clay beams, Fracture Toughness Determination and Micromechanics of Rock Under, vol.48, p.837, 2011.

I. Mode, . Mode, and . Loading, , vol.838, p.75, 2004.

T. D. Vo, A. Pouya, S. Hemmati, and A. M. Tang, Modelling desiccation crack geometry evolution in 839 clayey soils by analytical and numerical approaches, Canadian Geotechnical Journal, vol.840, p.76, 2018.
DOI : 10.1139/cgj-2018-0105

C. J. Miller, H. Mi, and N. Yessiller, Experimental analysis of desiccation crack propagation in clay 841 liners, Journal of the American Water Ressources Association, vol.34, issue.3, p.77, 1998.
DOI : 10.1111/j.1752-1688.1998.tb00964.x
URL : https://digitalcommons.calpoly.edu/cgi/viewcontent.cgi?article=1198&context=cenv_fac

D. Leguillon, M. C. Lafarie-frenot, Y. Pannier, and E. Martin, Prediction of the surface cracking 843 pattern of an oxidized polymer induced by residual and bending stresses, International Journal 844 of Solids and Structures, vol.91, pp.89-101, 2016.