M. Boutin, C. Flamin, S. Quinton, and G. Gosse, Analysis of life cycle of 1. thermoplastic 633 compounds loaded with hemp fibers, and 2. hemp concrete wall on wood structure, 2005.

F. Collet, M. Bart, L. Serres, and J. Miriel, Porous structure and water vapour sorption of hemp-based materials, Construction and Building Materials, vol.22, issue.6, pp.1271-1280, 2008.
DOI : 10.1016/j.conbuildmat.2007.01.018
URL : https://hal.archives-ouvertes.fr/hal-00705133

D. Samri and L. Arnaud, Assessment of heat and mass transfers in building porous materials, p.640

A. Tolkovsky, Sorption behaviour of hemp and lime concrete floors, MSc Architecture: 644 Advanced Environmental and Energy Studies, Graduate School of the Environment, 2010.

F. Collet, J. Chamoin, S. Pretot, and C. Lanos, Comparison of the hygric behaviour of three hemp concretes, Energy and Buildings, vol.62, pp.294-303, 2013.
DOI : 10.1016/j.enbuild.2013.03.010
URL : https://hal.archives-ouvertes.fr/hal-00810372

M. Bart, S. Moissette, Y. Oumeziane, and C. Lanos, Transient hygrothermal modelling of 651 coated hemp-concrete walls, European Journal of Environment and Civil Engineering, vol.65218, pp.927-944, 2014.
DOI : 10.1080/19648189.2014.911122

R. Walker and P. S. , Moisture transfer and thermal properties of hemp???lime concretes, Construction and Building Materials, vol.64, pp.270-276, 2014.
DOI : 10.1016/j.conbuildmat.2014.04.081

I. Othmen, P. Poullain, N. Leklou, M. Dundi, and X. Gao, Moisture transfer in three hemp concretes, Construction 658 Materials and Structures 1st International Conference on 659 Construction Materials and Structures, pp.1358-1363

Y. Diquelou, E. Gourlay, L. Arnaud, and B. Kurek, Impact of hemp shiv on cement setting and 662 hardening: Influence of the extracted components from the aggregates and study of the 663 interfaces with the inorganic matrix, Cement and Concrete Composites Mustata A, Mustata FStC, Moisture Absorption and Desorption in Flax and Hemp Fibres 666 and Yarns, Fibres and Textiles in Eastern, Europe Polymer Composites, vol.551033, issue.667, pp.112-121, 2012.

. Fiber, Unsaturated Polyester Composites, Polymer Composites, vol.26, pp.509-525, 2005.

H. Dhakal, Z. Zhang, and M. Richardson, Effect of water absorption on the mechanical 675 properties of hemp fibre reinforced unsaturated polyester composites, Composites Science 676 and Technology, pp.1674-1683, 2007.

A. Evrard, C. Flory-celini, M. Claeys-bruno, D. Herde, and A. , Influence of liquid absorption 679 coefficient on hygrothermal behaviour of an existing brick wall with Lime-Hemp plaster, 680 Building and Environment, pp.90-100, 2014.

N. Stevulova, J. Cigasova, P. Purcz, and I. Schwarzova, Long-Term Water Absorption 683 Behaviour of Hemp Hurds Composites, Chemical Engineering Transactions, vol.39, pp.559-684, 2014.
DOI : 10.3390/ma8052243
URL : http://www.mdpi.com/1996-1944/8/5/2243/pdf

B. Pejic, M. Kostic, P. Skundric, and J. Praskalo, The effects of hemicelluloses and 687 lignin removal on water uptake behavior of hemp fibers, Bioresource Technology, vol.68899, pp.7152-7159, 2008.
DOI : 10.1016/j.biortech.2007.12.073

N. Stevulova, J. Cigasova, P. Purez, I. Schwarzova, F. Kacik et al., Water Absorption Behavior of Hemp Hurds Composites, Materials, vol.8, issue.5, pp.2243-2257, 2015.
DOI : 10.1016/j.biortech.2007.12.073
URL : http://www.mdpi.com/1996-1944/8/5/2243/pdf

J. Siau, Transport processes in wood, 2004.
DOI : 10.1007/978-3-642-69213-0

P. Callaghan, Principles of nuclear magnetic resonance microscopy, 1991.

K. Whittall and A. Mackay, Quantitative interpretation of NMR relaxation data, Journal of Magnetic Resonance (1969), vol.84, issue.1, pp.134-152, 1989.
DOI : 10.1016/0022-2364(89)90011-5

S. Provencher, A constrained regularization method for inverting data represented by linear algebraic or integral equations, Computer Physics Communications, vol.27, issue.3, pp.213-227, 1982.
DOI : 10.1016/0010-4655(82)90173-4

P. Faure and S. Rodts, Proton NMR relaxation as a probe for setting cement pastes, Magn, p.705
DOI : 10.1016/j.mri.2008.01.026

S. Philippot, J. Korb, D. Petit, and H. Zanni, Analysis of microporosity and setting of reactive powder concrete by proton nuclear relaxation, Magnetic Resonance Imaging, vol.16, issue.5-6, pp.515-519, 1998.
DOI : 10.1016/S0730-725X(98)00063-0

M. Weiger and K. Pruessmann, MRI with Zero Echo Time, Encyclopedia of Magnetic 711 Resonance, p.713, 2012.
DOI : 10.1002/9780470034590.emrstm1292

L. Arnaud and E. Gourlay, Experimental study of parameters influencing mechanical properties of hemp concretes, Construction and Building Materials, vol.28, issue.1, pp.50-56, 2012.
DOI : 10.1016/j.conbuildmat.2011.07.052

A. Stamm and L. Hansen, The Bonding Force of Cellulosic Materials for Water (from Specific Volume and Thermal Data), The Journal of Physical Chemistry, vol.41, issue.7, pp.1007-1016, 1937.
DOI : 10.1021/j150385a011

G. Almeida, S. Leclerc, and P. Perre, NMR imaging of fluid pathways during drainage of 720 softwood in a pressure membrane chamber, International Journal of Multiphase Flow, vol.72134, pp.312-321, 2008.

E. Washburn, The Dynamics of Capillary Flow, Physical Review, vol.42, issue.3, pp.273-283, 1921.
DOI : 10.1021/ja01448a006

K. Sarkanen and C. Ludwig, Lignins: occurrence, formation, structure and reactions, 1971.