T. Hueckel and G. Baldi, Thermoplasticity of Saturated Clays: Experimental Constitutive Study, Journal of Geotechnical Engineering, vol.116, issue.12, pp.1778-1796, 1990.
DOI : 10.1061/(ASCE)0733-9410(1990)116:12(1778)

G. Baldi, T. Hueckel, A. Peano, and R. Pellegrini, Developments in modelling of thermohydro-geomechanical behaviour of boom clay and clay-based buffer materials, 1991.

Y. Cui, N. Sultan, P. Delage, P. Delage, and Y. Cui, A thermomechanical model for saturated clays, Canadian Geotechnical Journal, vol.37, issue.3, pp.607-6202, 2000.
DOI : 10.1139/t99-111

URL : https://hal.archives-ouvertes.fr/hal-01515787

C. Cekerevac and L. Laloui, Experimental study of thermal effects on the mechanical behaviour of a clay, International Journal for Numerical and Analytical Methods in Geomechanics, vol.28, issue.3, pp.209-228, 2004.
DOI : 10.1002/nag.332

H. Abuel-naga, D. Bergado, A. Bouazza, and G. Ramana, Volume change behaviour of saturated clays under drained heating conditions: experimental results and constitutive modeling, Canadian Geotechnical Journal, vol.44, issue.8, pp.94-956, 2007.
DOI : 10.1139/t07-031

P. Hong, J. Pereira, A. Tang, and Y. Cui, On some advanced thermo-mechanical models for saturated clays, International Journal for Numerical and Analytical Methods in Geomechanics, vol.52, issue.7, pp.2952-2971, 2013.
DOI : 10.1002/nag.2170

URL : https://hal.archives-ouvertes.fr/hal-00926922

T. Hueckel and M. Borsetto, Thermoplasticity of Saturated Soils and Shales: Constitutive Equations, Journal of Geotechnical Engineering, vol.116, issue.12, pp.1765-1777, 1990.
DOI : 10.1061/(ASCE)0733-9410(1990)116:12(1765)

J. Graham, N. Tanaka, T. Crilly, and M. Alfaro, Modified Cam-Clay modelling of temperature effects in clays, Canadian Geotechnical Journal, vol.38, issue.3, pp.608-621, 2001.
DOI : 10.1139/t00-125

J. Robinet, A. Rahbaoui, F. Plas, and P. Lebon, A constitutive thermomechanical model for saturated clays, Engineering Geology, vol.41, issue.1-4, pp.1-4145, 1996.
DOI : 10.1016/0013-7952(95)00049-6

L. Laloui and F. , ACMEG-T: Soil Thermoplasticity Model, Journal of Engineering Mechanics, vol.135, issue.9, pp.932-944, 2009.
DOI : 10.1061/(ASCE)EM.1943-7889.0000011

URL : http://orbi.ulg.ac.be/request-copy/2268/26927/34705/08_Laloui_Fran%c3%a7ois_EMX_2009.pdf

J. Hujeux, Calcul numérique de problèmes de consolidation élastoplastique, 1979.

T. Lê, Comportement thermo-hydro-mécanique de l'argile de boom, 2008.

P. Hong, Development and explicit integration of a thermo-mechanical model for saturated clays, p.30, 2013.
URL : https://hal.archives-ouvertes.fr/pastel-01058617

N. Sultan, Etude du comportement thermo-mécanique de l'argile de boom: expériences et modélisation, 1997.

D. Wood, Experimental Inspiration for Kinematic Hardening Soil Models, Journal of Engineering Mechanics, vol.130, issue.6, p.656, 2004.
DOI : 10.1061/(ASCE)0733-9399(2004)130:6(656)

K. Demars and R. Charles, Soil volume changes induced by temperature cycling, Canadian Geotechnical Journal, vol.19, issue.2, pp.188-194, 1982.
DOI : 10.1139/t82-021

G. Baldi, T. Hueckel, and R. Pellegrini, Thermal volume changes of the mineral???water system in low-porosity clay soils, Canadian Geotechnical Journal, vol.25, issue.4, pp.807-825, 1988.
DOI : 10.1139/t88-089

T. Hueckel and R. Pellegrini, Modeling of thermal failure of saturated clays, ISMES, 1989.

T. Hueckel, R. Pellegrini, D. Olmo, and C. , A constitutive study of thermo-elasto-plasticity of deep carbonatic clays. International journal for numerical and analytical methods in geomechanics, pp.549-574, 1998.

T. Hueckel, B. Francois, and L. Laloui, Explaining thermal failure in saturated clays, G??otechnique, vol.59, issue.3
DOI : 10.1680/geot.2009.59.3.197

URL : http://orbi.ulg.ac.be/request-copy/2268/26926/34703/07_Hueckel_et_al_Geot_2009.pdf

P. Delage, T. Le, A. Tang, Y. Cui, and X. Li, Suction effects in deep Boom Clay block samples, G??otechnique, vol.57, issue.2, pp.239-244, 2007.
DOI : 10.1680/geot.2007.57.2.239

URL : https://hal.archives-ouvertes.fr/hal-00204528

C. Coll, Endommagement des roches argileuses et perméabilité induite au voisinage d'ouvrages souterrains, 2005.

M. Zytynski, M. Randolph, R. Nova, and C. Wroth, On modelling the unloading-reloading behaviour of soils, International Journal for Numerical and Analytical Methods in Geomechanics, vol.34, issue.1, pp.87-93, 1978.
DOI : 10.1002/nag.1610020107

G. Houlsby and A. Puzrin, Principles of hyperplasticity: an approach to plasticity theory based on thermodynamic principles, 2006.

G. Mcdowell and K. Hau, A generalised Modified Cam clay model for clay and sand incorporating kinematic hardening and bounding surface plasticity, Granular Matter, vol.6, issue.1, pp.11-16, 2004.
DOI : 10.1007/s10035-003-0152-8

Y. H. Casm, A unified state parameter model for clay and sand. International journal for numerical and analytical methods in geomechanics, pp.621-653, 1998.

P. Hong, J. Pereira, Y. Cui, and A. Tang, Explicit integration of a thermo-mechanical model for clays, Computers and Geotechnics, vol.46, issue.0, pp.13-25, 2012.
DOI : 10.1016/j.compgeo.2012.05.016

URL : https://hal.archives-ouvertes.fr/hal-00780677

T. Hueckel and R. Pellegrini, Thermoplastic modeling of undrained failure of saturated clay due to heating., SOILS AND FOUNDATIONS, vol.31, issue.3, pp.1-16, 1991.
DOI : 10.3208/sandf1972.31.3_1

Y. Cui, T. Le, A. Tang, P. Delage, and X. Li, Investigating the time-dependent behaviour of Boom clay under thermomechanical loading, G??otechnique, vol.59, issue.4, pp.319-329, 2009.
DOI : 10.1680/geot.2009.59.4.319

URL : https://hal.archives-ouvertes.fr/hal-00377786