M. Ali, A. Goullieux, M. Queneudec, and R. M. Dheilly, Impact du broyage des granulats de PET sur les propriétés à l'état frais d'un composite cimentaire, Conférence Matériaux 2014 -Colloque Ecomatériau, p.1121406, 2014.

Y. W. Choi, D. J. Moon, J. S. Chung, and S. K. Et-cho, Effects of waste PET bottles aggregate on the properties of concrete, Cement and Concrete Research, vol.35, issue.4, pp.776-81, 2005.
DOI : 10.1016/j.cemconres.2004.05.014

Y. W. Choi, D. J. Moon, Y. J. Kim, and M. Lachemi, Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles, Construction and Building Materials, vol.23, issue.8, pp.2829-2864, 2009.
DOI : 10.1016/j.conbuildmat.2009.02.036

A. Damien, Guide du traitement des déchets, Syndicat National des Ingénieurs de l'Industrie et des Mines, 2013.

D. Dossogne, Polyéthylène haute densité PEHD, Techniques de l'Ingénieur, traité Plastiques et Composites. A 3 315, pp.1-10, 1996.

M. Frigione, Recycling of PET bottles as fine aggregate in concrete, Waste Management, vol.30, issue.6, pp.1101-1107, 2010.
DOI : 10.1016/j.wasman.2010.01.030

M. Haidar, Optimisation et durabilite?desdurabilite?des micro-be?tons a? base d'e?poxyde, Thèse, 2011.

Z. Ismail and E. Et-al-hashmi, Use of waste plastic in concrete mixture as aggregate replacement, Waste Management, vol.28, issue.11, pp.2041-2047, 2008.
DOI : 10.1016/j.wasman.2007.08.023

J. B. Park, S. Park, and J. , Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA, Cement and Concrete Composites, pp.128-135, 2007.

M. Karakoc?, R. Demirboga, I. Tu?rkmen, and I. Can, Modeling with ANN and effect of pumice aggregate and air entrainment on the freeze?thaw durabilities of HSC, Construction and Building Materials, issue.25, pp.4241-4249, 2011.

N. Kockal and T. Et-ozturan, Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes, Journal of Hazardous Materials, vol.179, issue.1-3, pp.54-965, 2010.
DOI : 10.1016/j.jhazmat.2010.03.098

N. Kockal and T. Et-ozturan, Durability of lightweight concretes with lightweight fly ash aggregates, Construction and Building Materials, vol.25, issue.3, pp.1430-1438, 2011.
DOI : 10.1016/j.conbuildmat.2010.09.022

. Kucharczykova?bkucharczykova?b, Z. Kers?ner, O. Pospi?chal, P. Misa?k, P. Dane?k et al., The porous aggregate pre-soaking in relation to the freeze?thaw resistance of lightweight aggregate concrete, Construction and Building Materials, pp.761-766, 2012.

M. Malhotra and K. E. Et-painter, Early-age strength properties, and freezing and thawing resistance of concrete incorporating high volumes of ASTM class F fly ash, International Journal of Cement Composites and Lightweight Concrete, vol.11, issue.1, pp.37-46, 1989.
DOI : 10.1016/0262-5075(89)90034-1

M. A. Mohamed, Influence de la valorisation des microfibres végétales sur la formulation et la résistance aux cycles de gel dégel de BAP, Thèse, 2011.

N. En, AFNOR, Granulats pour béton-A1 Juin, 2008.

N. P18-424, AFNOR, Bétons -Essai de gel sur béton durci. Gel dans l'eau -Dégel dans l'eau, pp.18-424

N. P18-425, AFNOR, Bétons -Essai de gel sur béton durci. Gel dans l'air -Dégel dans l'eau, pp.18-425

R. Polat, R. Demirbog?a, M. Karakoc?, and I. Et-tu?rkmen, The influence of lightweight aggregate on the physico-mechanical properties of concrete exposed to freeze???thaw cycles, Cold Regions Science and Technology, vol.60, issue.1, pp.51-56, 2010.
DOI : 10.1016/j.coldregions.2009.08.010

K. Riding, B. Blackwell, A. Momeni, and H. Et-mcleod, Effects of Curing Methods and Supplementary Cementitious Material Use on Freeze Thaw Durability of Concrete Containing D-Cracking Aggregates, 2013.

N. Saikia and J. Et-de-brito, Use of plastic waste as aggregate in cement mortar and concrete preparation: A review, Construction and Building Materials, vol.34, issue.34, pp.385-401, 2012.
DOI : 10.1016/j.conbuildmat.2012.02.066

M. Saito, M. Ohta, and H. Ishimori, Chloride permeability of concrete subjected to freeze-thaw damage, Cement and Concrete Composites, vol.16, issue.4, pp.233-239, 1994.
DOI : 10.1016/0958-9465(94)90035-3

H. S. Shang and Y. P. Song, Experimental study of strength and deformation of plain concrete under biaxial compression after freezing and thawing cycles, Cement and Concrete Research, vol.36, issue.10, pp.1857-1864, 2006.
DOI : 10.1016/j.cemconres.2006.05.018

H. S. Shang, Y. P. Song, and L. Et-qin, Experimental study on strength and deformation of plain concrete under triaxial compression after freeze-thaw cycles, Building and Environment, vol.43, issue.7, pp.1197-1204, 2008.
DOI : 10.1016/j.buildenv.2006.08.027

H. S. Shang, Y. P. Song, and J. Ou, Behavior of air-entrained concrete after freeze-thaw cycles, Acta Mechanica Solida Sinica, vol.22, issue.3, pp.261-266, 2009.
DOI : 10.1016/S0894-9166(09)60273-1

P. Tikalsky, J. Pospisil, and W. Et-macdonald, A method for assessment of the freeze???thaw resistance of preformed foam cellular concrete, Cement and Concrete Research, vol.34, issue.5, pp.889-893, 2004.
DOI : 10.1016/j.cemconres.2003.11.005

H. S. Wilson and V. M. Malhotra, Development of high strength lightweight concrete for structural applications, The International Journal of Cement Composites and Lightweight Concrete, 1988.

O. Yazoghli, Contribution à la valorisation des emballages alimentaires de post-consommation en polyéthylène terephthalate et en polyéthylène haute densité dans des matrices cimentaires, Etude de faisabilité et évaluation des performances physico-mécaniques, hydriques et thermiques Thèse de doctorat, 2005.