C. Hannes, K. N. Schniepp, J. Kudin, . Li, K. Robert et al., Bending properties of single functionalized graphene sheets probed by atomic force microscopy, ACS Nano, vol.2, issue.12, pp.2577-2584, 2008.

S. Cranford, D. Sen, and M. J. Buehler, Meso-origami: Folding multilayer graphene sheets, Applied Physics Letters, vol.95, issue.12, p.123121, 2009.
DOI : 10.1063/1.3223783

H. Kobayashi, B. Kresling, and J. F. Vincent, The geometry of unfolding tree leaves, Proceedings of the Royal Society B: Biological Sciences, vol.265, issue.1391, pp.147-154, 1391.
DOI : 10.1098/rspb.1998.0276

D. Buisson, Manuel pratique d'origami, 1990.

K. Miura, A Note on Intrinsic Geometry of Origami, Takaki, ktk scient edition, pp.91-102, 1994.

R. J. Lang, Origami design secrets : mathematical methods for an ancient art, 2003.
DOI : 10.1201/b10706

R. J. Lang, Crease Pattern Gallery

S. Belcastro and T. C. Hull, Modelling the folding of paper into three dimensions using affine transformations, Linear Algebra and its Applications, vol.348, issue.1-3, pp.273-282, 2002.
DOI : 10.1016/S0024-3795(01)00608-5

H. Stachel, A kinematic approach to Kokotsakis meshes, Computer Aided Geometric Design, vol.27, issue.6, pp.428-437, 2010.
DOI : 10.1016/j.cagd.2010.05.002

W. Wu and Z. You, Modelling rigid origami with quaternions and dual quaternions, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.31, issue.2119, pp.2155-2174, 2010.
DOI : 10.1098/rspa.2009.0625

T. Tachi, Simulation of Rigid Origami, 4th Int, 2006.
DOI : 10.1201/b10653-20

E. D. Demaine, M. L. Demaine, V. Hart, N. Gregory, T. Price et al., (Non)existence of Pleated Folds: How Paper Folds Between Creases. Abstr. from 7th Japan Conf, Comput. Geom. Graphs, p.19, 2009.

A. P. Korte, E. L. Starostin, and G. H. Van-der-heijden, Triangular buckling patterns of twisted inextensible strips, Proc. R. Soc. A Math, pp.6-7
DOI : 10.1093/qjmam/hbn012

S. Miyazaki, An Origami Playing Simulator in the Virtual Space, 1<25::AID-VIS134> 3.0.CO;2-V, pp.25-421099, 1995.

D. J. Balkcom and M. T. Mason, Robotic origami folding, The International Journal of Robotics Research, vol.27, issue.5, pp.613-627, 2008.
DOI : 10.1177/0278364908090235

S. A. Day, An Introduction to Dynamic Relaxation, Eng, vol.29, pp.218-221, 1965.

M. Barnes, Form and stress engineering of tension structures, Struct. Eng. Rev, vol.6, issue.3, 1994.

C. Douthe and O. Baverel, Design of nexorades or reciprocal frame systems with the dynamic relaxation method, Computers & Structures, vol.87, issue.21-22, pp.21-221296, 2009.
DOI : 10.1016/j.compstruc.2009.06.011

URL : https://hal.archives-ouvertes.fr/hal-00960726

T. Tachi, Geometric considerations for the design of rigid origami structures, In Assoc. Shell Spat. Struct, 2010.

Z. Xi and J. Lien, Folding Rigid Origami With Closure Constraints, Volume 5B: 38th Mechanisms and Robotics Conference, pp.10-1115, 2014.
DOI : 10.1115/DETC2014-35556

F. Gioia, D. Dureisseix, R. Motro, and B. Maurin, Design and Analysis of a Foldable/Unfoldable Corrugated Architectural Curved Envelop, Journal of Mechanical Design, vol.134, issue.3
DOI : 10.1115/1.4005601

URL : https://hal.archives-ouvertes.fr/hal-00702619

E. D. Demaine and M. L. Demaine, Curved Crease Folding a Review on Art, Design and Mathematics, Proc. IABSE-IASS Symp. Taller, Longer, Light. (IABSE-IASS 2011), 2011.

J. Mitani, Column-shaped origami design based on mirror reflections, 15th Int. Conf. Geom. Graph, 2012.

E. D. Demaine, M. L. Demaine, and D. Koschitz, Reconstructing David Huffman???s Legacy in Curved-Crease Folding, th Int. Conf. Origami Sci. Math, 2010.
DOI : 10.1201/b10971-6

J. P. Duncan and J. L. Duncan, Folded Developables, 1784<191:FD> 2.0.CO, pp.191-205, 1784.
DOI : 10.1098/rspa.1982.0126

Y. Kergosien, T. L. Gotoda, and . Kunii, Bending and creasing virtual paper, IEEE Computer Graphics and Applications, vol.14, issue.1, pp.40-48, 1994.
DOI : 10.1109/38.250917

M. Kilian, S. Flöry, Z. Chen, N. J. Mitra, A. Sheer et al., Curved folding, ACM SIGGRAPH 2008 Pap. -SIGGRAPH '08, 2008.
DOI : 10.1145/1399504.1360674

T. Tachi and G. Epps, Designing One-DOF Mechanisms for Architecture by Rationalizing Curved Folding, In Int. Symp. Algorithmic Des. Archit. Urban Des, 2011.

E. Cerda and F. Melo, Conical dislocations in crumpling, Nature, vol.401, 1999.

E. Cerda, J. Mahadevan, and . Pasini, The elements of draping, Proceedings of the National Academy of Sciences, vol.101, issue.7, pp.1806-1810, 2004.
DOI : 10.1073/pnas.0307160101

E. Cerda and L. Mahadevan, Confined developable elastic surfaces: cylinders, cones and the Elastica, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.461, issue.2055, pp.671-700, 1371.
DOI : 10.1098/rspa.2004.1371

T. Witten, Stress focusing in elastic sheets, Reviews of Modern Physics, vol.79, issue.2, pp.643-675, 2007.
DOI : 10.1103/RevModPhys.79.643

H. William and . Frey, Modeling buckled developable surfaces by triangulation, Comput. Des, vol.36, issue.4, pp.299-313, 2004.

T. Nojima, Origami Modelling of Functional Structures based on Organic Patterns, Nature, 1996.

T. Nojima, Modelling of Folding Patterns in Flat Membranes and Cylinders by Using Origami., Transactions of the Japan Society of Mechanical Engineers Series C, vol.66, issue.643, 2000.
DOI : 10.1299/kikaic.66.1050

W. Giles, I. Hunt, and . Ario, Twist buckling and the foldable cylinder: An exercise in origami, Int. J. Non. Linear. Mech, vol.40, issue.6, pp.833-843, 2005.

T. Tachi, Origamizing Polyhedral Surfaces, IEEE Transactions on Visualization and Computer Graphics, vol.16, issue.2, pp.298-311, 2010.
DOI : 10.1109/TVCG.2009.67

M. Newton, Paper for packing Lining and other purposes, 1880.

H. Ichikawa, Reinforced composite corrugate body, US Patent, p.738, 1994.

E. A. Elsayed and B. Basily, A continuous folding process for sheet materials, International Journal of Materials and Product Technology, vol.21, issue.1/2/3, p.217, 2004.
DOI : 10.1504/IJMPT.2004.004753

H. Hochfeld, Process and Machine for Pleating pliable materials, 1959.

E. Rapp, Sandwich-type structural element, 1960.

K. Miura, Zeta-Core Sandwich -Its Concept and Realization, ISAS Rep, vol.37, issue.6, pp.137-164, 1972.

E. Davis, E. D. Demaine, M. L. Demaine, J. Ramseyer, and O. Tessellations, Reconstructing David Huffman???s Origami Tessellations, Volume 6B: 37th Mechanisms and Robotics Conference, p.111010, 2013.
DOI : 10.1115/DETC2013-12710

URL : http://hdl.handle.net/1721.1/86200

E. Gjerde, Origami tessellations: awe-inspiring geometric designs. A K Peters, 2009.
DOI : 10.1201/b10664

A. Keith and . Seffen, Compliant shell mechanisms, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.370, pp.2010-2026, 1965.

M. Schenk, D. Simon, and . Guest, Geometry of Miura-folded metamaterials, Proceedings of the National Academy of Sciences, vol.110, issue.9, pp.3276-81, 2013.
DOI : 10.1073/pnas.1217998110

Y. Zhiyan, Z. V. Wei, L. Guo, H. Y. Dudte, L. Liang et al., Geometric Mechanics of Periodic Pleated Origami, Phys. Rev. Lett, vol.110, issue.21, p.215501, 2013.

Z. You, Folding structures out of flat materials, Science, vol.345, issue.6197, pp.623-624, 2014.
DOI : 10.1126/science.1257841

J. L. Silverberg-evans, L. Mcleod, R. C. Hayward, T. C. Hull, C. D. Santangelo et al., Using origami design principles to fold reprogrammable mechanical metamaterials, Science, vol.345, issue.6197, pp.345-647, 2014.
DOI : 10.1126/science.1252876

L. Jesse, J. Silverberg, . Na, A. Arthur, B. Evans et al., Origami structures with a critical transition to bistability arising from hidden degrees of freedom, Nat. Mater, vol.14, pp.1-5, 1038.

D. Ronald, H. Resch, and . Christiansen, The design and analysis of kinematic folded-plate systems, Proc. Symp. folded plates Prism, 1970.

K. Miura, New structural form of sandwich core, Journal of Aircraft, vol.12, issue.5, 1975.
DOI : 10.2514/3.44468

A. Lebée and K. Sab, Transverse shear stiffness of a chevron folded core used in sandwich construction, International Journal of Solids and Structures, vol.47, issue.18-19, pp.18-192620, 2010.
DOI : 10.1016/j.ijsolstr.2010.05.024

A. Lebée and K. Sab, Homogenization of thick periodic plates: Application of the Bending-Gradient plate theory to a folded core sandwich panel, International Journal of Solids and Structures, vol.49, issue.19-20, pp.2778-2792, 2012.
DOI : 10.1016/j.ijsolstr.2011.12.009

D. Kling, Doubly periodic flat surfaces in three-space, 1997.

D. Kling, Paterning technology for folded sheet structures, p.997, 2005.

R. Czaplicki, Cellular core structure providing gridlike bearing surfaces on opposing parallel planes of the formed core, p.474, 1991.

C. Hoberman, URL http://www.google.com/patents/US5234727. [80] Tomohiro Tachi. Generalization of rigid-foldable quadrilateral-mesh origami, Proc. IASS Symp. Int. Association for Shell and Spatial Structures, pp.173-179, 1993.

H. Stachel, Remarks On Miura-Ori, A Japanese Folding Method, Int. Conf. Eng. Graph. Des, pp.2-5, 2009.

M. Trautz and A. Kunstler, Deployable folded plate structures?folding patterns based on 4-fold- mechanism using stiff plates, Proc. Int. Assoc. Shell Spat. Struct

. Symp, URL http://trako.arch.rwtha a c h e n, Val. Evol. Trends Des. Anal. Constr. Shell Spat. Struct, 2009.

T. Tachi, Freeform variations of origami, J. Geom. Graph, vol.14, issue.2, pp.203-215, 2010.

A. Falk, P. V. Buelow, and P. H. Kirkegaard, Folded plate structures as building envelopes, World Conf. Timber Eng, p.47

V. Beatini and K. Korkmaz, Shapes of Miura Mesh Mechanism with Mobility One, International Journal of Space Structures, vol.27, issue.1, pp.101-114, 2013.
DOI : 10.1260/0266-3511.28.2.101

Y. Klett, Realtime Rigid Folding Algorithm for Quadrilateral-Based 1-DOF Tessellations, Volume 6B: 37th Mechanisms and Robotics Conference, pp.2013-12659, 2013.
DOI : 10.1115/DETC2013-12659

J. M. Gattas, W. Wu, and Z. You, Miura-Base Rigid Origami: Parameterizations of First-Level Derivative and Piecewise Geometries, Journal of Mechanical Design, vol.135, issue.11, p.111011, 2013.
DOI : 10.1115/1.4025380

P. Sareh and S. Guest, A Framework for the Symmetric Generalisation of the Miura-ori, International Journal of Space Structures, vol.30, issue.2, 2015.
DOI : 10.1260/0266-3511.30.2.141

Z. Song, T. Ma, R. Tang, Q. Cheng, X. Wang et al., Origami lithium-ion batteries, Nature Communications, vol.348, pp.1-6
DOI : 10.1038/ncomms4140

A. M. El-sawi, A. S. Wifi, M. Y. Younan, E. A. Elsayed, and B. Basily, Application of folded sheet metal in flat bed solar air collectors, Applied Thermal Engineering, vol.30, issue.8-9, pp.864-871, 2010.
DOI : 10.1016/j.applthermaleng.2009.12.018

C. Thill, . Etches, . Bond, P. Potter, and . Weaver, Abstract, The Aeronautical Journal, vol.39, issue.1129, pp.117-139, 1129.
DOI : 10.1016/S0266-3538(02)00159-8

M. Schenk and S. Guest, Origami Folding, Fifth Int. Meet. Origami Sci. Math. Educ, pp.1-16, 2011.
DOI : 10.1201/b10971-27

M. Joseph, Z. Gattas, and . You, Geometric assembly of rigid-foldable morphing sandwich structures, Eng. Struct, vol.94, pp.149-159

M. Santer and S. Pellegrino, Concept and Design of a Multistable Plate Structure, Journal of Mechanical Design, vol.133, issue.8, 2011.
DOI : 10.1115/1.4004459

S. Ahmed, C. Lau, A. Crivaro, K. Mcgough, R. Sheridan et al., Multi-Field Responsive Origami Structures: Preliminary Modeling and Experiments, Volume 6B: 37th Mechanisms and Robotics Conference, pp.2013-12405, 2013.
DOI : 10.1115/DETC2013-12405

A. Edwin, D. J. Peraza-hernandez, R. Hartl, and . Jr, Design and numerical analysis of an SMA mesh-based self-folding sheet, Smart Mater. Struct, vol.2222, issue.99, p.94008, 2013.

R. D. Resch, Self-supporting structural unit having a series of repetitious geometrical modules, 1968.

R. D. Resch, The topological design of sculptural and architectural systems, Proceedings of the June 4-8, 1973, national computer conference and exposition on, AFIPS '73, p.643, 1973.
DOI : 10.1145/1499586.1499744

T. Tachi, Designing Freeform Origami Tessellations by Generalizing Resch's Patterns, Journal of Mechanical Design, vol.135, issue.11, p.111006, 2013.
DOI : 10.1115/1.4025389

A. Brunner, Expansible surface structure, 1968.

M. Schenk, Folded Shell Structures, 2011.

C. Kenneth, T. Cheung, S. Tachi, K. Calisch, and . Miura, Origami interleaved tube cellular materials, Smart Mater. Struct, vol.23, issue.9

V. Beatini, Translational Method for Designing Folded Plate Structures, International Journal of Space Structures, vol.30, issue.2, 2015.
DOI : 10.1260/0266-3511.30.2.85

R. Xie, Y. Chen, and J. M. Gattas, Parametrisation and application of cube and eggboxtype folded geometrics in-press, 2015. [105] Tomohiro Tachi. One-dof cylindrical deployable structures with rigid quadrilateral panels, Proc. IASS Symp, pp.2295-2305, 2009.

W. Yao and J. S. Dai, Dexterous Manipulation of Origami Cartons With Robotic Fingers Based on the Interactive Configuration Space, Journal of Mechanical Design, vol.130, issue.2, p.22303, 2008.
DOI : 10.1115/1.2813783

M. Trautz, H. W. Heyden, R. Herkrath, T. Pofahl, G. Hirt et al., Herstellung frei geformter, selbst tragender Faltstrukturen aus Stahlblech mit der inkrementellen Blechumformung (IBU) Stahlbau, pp.81959-967, 2012.

R. Herkrath and M. Trautz, Starre Faltungen als Leichtbauprinzip im Bauwesen, Bautechnik, vol.88, issue.2, pp.80-85, 2011.
DOI : 10.1002/bate.201110007

A. Künstler and M. Trautz, Wandelbare Faltungen aus biegesteifen Faltelementen, Bautechnik, vol.88, issue.2, pp.86-93, 2011.
DOI : 10.1002/bate.201110008

J. Li and J. Knippers, Segmental timber plate shell for the Forstpavillon Schwäbisch Gmünd?The application of finger joint in plate structures, Int. J. Sp. Struct, 2015.

K. Miura, Map Fold a La Miura Style, Its Physical Characteristics and Application to the Space Science, In Res. Pattern Form, pp.77-90, 1994.

K. Miura and M. Natori, 2-D array experiment on board a space flyer unit, Sp. Sol. Power Rev, vol.5, pp.345-356, 1985.

R. J. Lang, Origami: Complexity in Creases (Again), Eng. Sci, pp.8-19, 2004.

R. Chudoba, J. Van-der-woerd, M. Schmerl, and J. Hegger, ORICRETE: Modeling support for design and manufacturing of folded concrete structures, Advances in Engineering Software, vol.72, 2013.
DOI : 10.1016/j.advengsoft.2013.05.004

F. Lechenault, B. Thiria, and M. Adda-bedia, Mechanical Response of a Creased Sheet, Physical Review Letters, vol.112, issue.24, pp.1-5
DOI : 10.1103/PhysRevLett.112.244301

S. Roche, G. Mattoni, and Y. Weinand, Rotational Stiffness at Ridges of Timber Folded-plate Structures, IABSE Symposium Report, vol.104, issue.14
DOI : 10.2749/222137815815775187

A. Stitic, C. Robeller, and Y. Weinand, Timber Folded Plate Structures ??? Folded Form Analysis, IABSE Symposium Report, vol.104, issue.31, 2015.
DOI : 10.2749/222137815815774043

C. Robeller, Interlocking Folded Plate: Integrated Mechanical Attachment for Structural Wood Panels, Int. J. Sp. Struct, 2015.
DOI : 10.1007/978-3-319-11418-7_18

G. Philippe, V. Ciarlet, and . Lods, Asymptotic analysis of linearly elastic shells. I. Justification of membrane shell equations, Arch. Ration. Mech. Anal, vol.136, issue.2, pp.119-161, 1996.

B. Basily and E. A. Elsayed, Dynamic axial crushing of multilayer core structures of folded Chevron patterns, International Journal of Materials and Product Technology, vol.21, issue.1/2/3, p.169, 2004.
DOI : 10.1504/IJMPT.2004.004750

M. Q. Nguyen, S. S. Jacombs, R. S. Thomson, M. L. Hachenberg, and . Scott, Simulation of impact on sandwich structures, Composite Structures, vol.67, issue.2, pp.217-227, 2005.
DOI : 10.1016/j.compstruct.2004.09.018

M. Kintscher, L. Kärger, D. Wetzel, and . Hartung, Stiffness and failure behaviour of folded sandwich cores under combined transverse shear and compression, Composites Part A: Applied Science and Manufacturing, vol.38, issue.5, pp.1288-1295, 2007.
DOI : 10.1016/j.compositesa.2006.11.008

S. Fischer, K. Drechsler, S. Kilchert, and A. Johnson, Mechanical tests for foldcore base material properties, Composites Part A: Applied Science and Manufacturing, vol.40, issue.12, pp.1941-1952, 2009.
DOI : 10.1016/j.compositesa.2009.03.005

S. Heimbs, J. Cichosz, M. Klaus, S. Kilchert, and A. Johnson, Sandwich structures with textile-reinforced composite foldcores under impact loads, Composite Structures, vol.92, issue.6, pp.1485-1497, 2010.
DOI : 10.1016/j.compstruct.2009.11.001

E. Baranger, C. Cluzel, and P. Guidault, Modelling of the Behaviour of Aramid Folded Cores Up to Global Crushing, Strain, vol.45, pp.170-178, 2011.
DOI : 10.1111/j.1475-1305.2010.00753.x

URL : https://hal.archives-ouvertes.fr/hal-00435880

F. Hähnel, K. Wolf, and A. Haue, Wedge-shaped folded sandwich cores for aircraft applications: from design and manufacturing process to experimental structure validation, CEAS Aeronautical Journal, vol.20, issue.2, pp.203-212, 2011.
DOI : 10.1007/s13272-011-0014-8

M. Grzeschik, Performance of Foldcores Mechanical Properties and Testing, Volume 6B: 37th Mechanisms and Robotics Conference, 2013.
DOI : 10.1115/DETC2013-13324

R. Sturm, Y. Klett, . Ch, H. Kindervater, and . Voggenreiter, Failure of CFRP airframe sandwich panels under crash-relevant loading conditions, Composite Structures, vol.112, pp.11-21, 2014.
DOI : 10.1016/j.compstruct.2014.02.001

R. Sturm and S. Fischer, Virtual Design Method for Controlled Failure in Foldcore Sandwich Panels, Applied Composite Materials, vol.112, issue.2007, pp.10443-10458, 2015.
DOI : 10.1007/s10443-015-9436-5

S. Liu, G. Lu, Y. Chen, and Y. W. Leong, Deformation of the Miura-ori patterned sheet, International Journal of Mechanical Sciences, vol.99, 2015.
DOI : 10.1016/j.ijmecsci.2015.05.009

S. Fischer, Aluminium foldcores for sandwich structure application: Mechanical properties and FE-simulation. Thin-Walled Struct, pp.31-41

E. Baranger, P. Guidault, and C. Cluzel, Numerical modeling of the geometrical defects of an origami-like sandwich core, Composite Structures, vol.93, issue.10, pp.2504-25101, 2011.
DOI : 10.1016/j.compstruct.2011.04.011

URL : https://hal.archives-ouvertes.fr/hal-00640689

L. P. Shabalin, A. V. Gorelov, I. N. Sidorov, V. I. Khaliulin, and I. V. Dvoyeglazov, Calculation of the parameters of stress-strain and ultimate states of composite foldcores under transverse compression and shear, Mechanics of Composite Materials, vol.47, issue.4, pp.415-426, 2012.
DOI : 10.1007/s11029-012-9287-1

M. Joseph, Z. Gattas, and . You, Quasi-Static Impact Response of Alternative Origami-Core Sandwich Panels, 6B 37th Mech. Robot. Conf, pp.6-07, 2013.

X. Zhou, H. Wang, and Z. You, Mechanical properties of Miura-based folded cores under quasistatic loads. Thin-Walled Struct, pp.296-310, 2014.

S. Kilchert, A. F. Johnson, and H. Voggenreiter, Modelling the impact behaviour of sandwich structures with folded composite cores, Composites Part A: Applied Science and Manufacturing, vol.57, pp.16-26, 2014.
DOI : 10.1016/j.compositesa.2013.10.023

E. Baranger, P. Guidault, C. Cluzel, and S. Fischer, Generation of physical defects for the prediction of the behaviour of folded cores, Eur. Conf. Comput. Mech. Palais des Congrès, 2010.

T. Nojima, Development of Newly Designed Ultra-Light Core Structures, JSME International Journal Series A, vol.49, issue.1, pp.38-42, 2006.
DOI : 10.1299/jsmea.49.38

K. Saito and T. Nojima, Development of Light-Weight Rigid Core Panels, Journal of Solid Mechanics and Materials Engineering, vol.1, issue.9, pp.1097-1104, 2007.
DOI : 10.1299/jmmp.1.1097

K. Saito, S. Pellegrino, and T. Nojima, Manufacture of Arbitrary Cross-Section Composite Honeycomb Cores Based on Origami Techniques

K. Saito, A. Tsukahara, and Y. Okabe, Designing of Self-Deploying Origami Models Using Geometrically Misaligned Crease Patterns, Volume 5B: 38th Mechanisms and Robotics Conference, pp.5-08, 2014.
DOI : 10.1115/DETC2014-35592

. Ir, . Arch, M. Niels-de-temmerman, T. Mollaert, L. D. Van-mele et al., Design and Analysis of a Foldable Mobile Shelter System, Int. J. Sp. Struct, vol.22, issue.3, pp.161-168, 2007.

M. Sílvia-edite, M. Calretas, and . Kong, Architecture and Paper Structures ? Could Paper- Folding Become a Methodology in Architecture? Appl, Mech. Mater, pp.548-5491627, 2014.

. Heino and . Engel, Structure systems, Dt. Verl.-Anstalt, 1967.

H. Buri, I. Stotz, and Y. Weinand, Curved Folded Plate Timber Structures, IABSE-IASS Symp, 2011.

L. Nagy, L. Rhode-barbarigos, S. Adriaenssens, and A. Kilian, Conceptual Design of a Single-Crease Origami-Arc Inspired Movable Footbridge Structure, International Journal of Space Structures, vol.30, issue.2
DOI : 10.1260/0266-3511.30.2.75