J. Salençon, Calcuì a la rupture et analyse limite, 1983.

J. Salençon, Handbook of Continuum Mechanics: General Concepts, Thermoelasticity. Physics and Astronomy Online Library, 2001.
DOI : 10.1007/978-3-642-56542-7

K. Johansen, Yield-line theory. Cement and Concrete Association London, 1962.

S. Sloan, Lower bound limit analysis using finite elements and linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.18, issue.1, pp.61-77, 1988.
DOI : 10.1002/nag.1610120105

K. Krabbenhoft and L. Damkilde, Lower bound limit analysis of slabs with nonlinear yield criteria, Computers & Structures, vol.80, issue.27-30, pp.2043-2057, 2002.
DOI : 10.1016/S0045-7949(02)00269-9

H. Ciria, J. Peraire, and J. Bonet, Mesh adaptive computation of upper and lower bounds in limit analysis, International Journal for Numerical Methods in Engineering, vol.20, issue.1, pp.899-944, 2008.
DOI : 10.1002/nme.2275

S. Sloan, Upper bound limit analysis using finite elements and linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.24, issue.3, pp.263-282, 1989.
DOI : 10.1002/nag.1610130304

J. Pastor, T. Thai, and P. Francescato, New bounds for the height limit of a vertical slope, International Journal for Numerical and Analytical Methods in Geomechanics, vol.16, issue.2, pp.165-182, 2000.
DOI : 10.1002/(SICI)1096-9853(200002)24:2<165::AID-NAG62>3.0.CO;2-A

A. Makrodimopoulos and C. Martin, Upper bound limit analysis using simplex strain elements and second-order cone programming. International journal for numerical and analytical methods in geomechanics, pp.835-865, 2007.

C. Le, M. Gilbert, and H. Askes, Limit analysis of plates using the EFG method and second-order cone programming, International Journal for Numerical Methods in Engineering, vol.3, issue.13, pp.1532-1552, 2009.
DOI : 10.1002/nme.2535

C. Le, Novel numerical procedures for limit analysis of structures: Mesh-free methods and mathematical programming, 2010.

S. Zhou, Y. Liu, and S. Chen, Upper bound limit analysis of plates utilizing the C1 natural element method, Computational Mechanics, vol.277, issue.1265, pp.1-19, 2012.
DOI : 10.1007/s00466-012-0688-8

. Mosek, The mosek optimization toolbox for matlab manual, 2008.

E. Christiansen and K. Andersen, Computation of collapse states with von Mises type yield condition, International Journal for Numerical Methods in Engineering, vol.46, issue.8, pp.1185-1202, 1999.
DOI : 10.1002/(SICI)1097-0207(19991120)46:8<1185::AID-NME743>3.3.CO;2-E

C. Le, H. Nguyen-xuan, and H. Nguyen-dang, Upper and lower bound limit analysis of plates using FEM and second-order cone programming, Computers & Structures, vol.88, issue.1-2, pp.65-73, 2010.
DOI : 10.1016/j.compstruc.2009.08.011

D. Johnson, Mechanism determination by automated yield-line analysis, Structural Engineer, vol.72, pp.323-323, 1994.

A. Jennings, On the identification of yield-line collapse mechanisms, Engineering Structures, vol.18, issue.4, pp.332-337, 1996.
DOI : 10.1016/0141-0296(95)00153-0

A. Thavalingam, A. Jennings, J. Mckeown, and D. Sloan, A computerised method for rigid-plastic yield-line analysis of slabs, Computers & Structures, vol.68, issue.6, pp.601-612, 1998.
DOI : 10.1016/S0045-7949(98)00082-0

M. Braestrup, Yield-line theory and limit analysis of plates and slabs. Danmarks Tekniske Højskole, Afdelingen for Baerende Konstruktioner, 1971.

H. Jr, P. Belytschko, and T. , Numerical methods for the limit analysis of plates, Journal of Applied Mechanics, vol.35, p.796, 1968.

A. Capsoni and L. Corradi, Limit analysis of plates-a finite element formulation, Structural Engineering and Mechanics, vol.8, issue.4, pp.325-341, 1999.
DOI : 10.12989/sem.1999.8.4.325

O. Zienkiewicz, R. Taylor, and R. Taylor, The finite element method for solid and structural mechanics, 2005.

P. Ciarlet, The finite element method for elliptic problems, 1978.

J. Munro, D. Fonseca, and A. , Yield line method by finite elements and linear programming, Structural Engineer, vol.56, issue.2, pp.37-44, 1978.

K. Balasubramanyam and V. Kalyanaraman, Yield???Line Analysis by Linear Programming, Journal of Structural Engineering, vol.114, issue.6, pp.1431-1437, 1988.
DOI : 10.1061/(ASCE)0733-9445(1988)114:6(1431)

A. Makrodimopoulos, Remarks on some properties of conic yield restrictions in limit analysis, International Journal for Numerical Methods in Biomedical Engineering, vol.463, issue.11, pp.1449-1461, 2010.
DOI : 10.1002/cnm.1224

R. Clough and J. Tocher, Finite element stiffness matrices for analysis of plates in bending, Proceedings of conference on matrix methods in structural analysis, 1965.

E. Fox, Limit Analysis for Plates: The Exact Solution for a Clamped Square Plate of Isotropic Homogeneous Material Obeying the Square Yield Criterion and Loaded by Uniform Pressure, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.277, issue.1265, pp.121-155, 1265.
DOI : 10.1098/rsta.1974.0047

K. Andersen, E. Christiansen, and M. Overton, Computing Limit Loads by Minimizing a Sum of Norms, SIAM Journal on Scientific Computing, vol.19, issue.3, pp.1046-1062, 1998.
DOI : 10.1137/S1064827594275303

M. Save, C. Massonnet, and G. De-saxce, Plastic limit analysis of plates, shells, and disks, 1997.